Add check for the new prepo type under SaveReport

Stub these 2 SaveReport commands introduced in the 10.0 nnsdk nso

.ci/scripts/clang/docker.sh

@@ -1,18 +0,0 @@
-#!/bin/bash -ex
-
-# Exit on error, rather than continuing with the rest of the script.
-set -e
-
-cd /yuzu
-
-ccache -s
-
-mkdir build || true && cd build
-cmake .. -DDISPLAY_VERSION=$1 -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=/usr/lib/ccache/clang -DCMAKE_CXX_COMPILER=/usr/lib/ccache/clang++ -DYUZU_ENABLE_COMPATIBILITY_REPORTING=${ENABLE_COMPATIBILITY_REPORTING:-"OFF"} -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DUSE_DISCORD_PRESENCE=ON -DENABLE_QT_TRANSLATION=ON -DCMAKE_INSTALL_PREFIX="/usr"
-
-make -j$(nproc)
-
-ccache -s
-
-ctest -VV -C Release
-

.ci/scripts/clang/exec.sh

@@ -1,8 +0,0 @@
-#!/bin/bash -ex
-
-mkdir -p "ccache"  || true
-chmod a+x ./.ci/scripts/clang/docker.sh
-# the UID for the container yuzu user is 1027
-sudo chown -R 1027 ./
-docker run -e ENABLE_COMPATIBILITY_REPORTING -e CCACHE_DIR=/yuzu/ccache -v $(pwd):/yuzu yuzuemu/build-environments:linux-fresh /bin/bash /yuzu/.ci/scripts/clang/docker.sh $1
-sudo chown -R $UID ./

.ci/scripts/clang/upload.sh

@@ -1,20 +0,0 @@
-#!/bin/bash -ex
-
-. .ci/scripts/common/pre-upload.sh
-
-REV_NAME="yuzu-linux-${GITDATE}-${GITREV}"
-ARCHIVE_NAME="${REV_NAME}.tar.xz"
-COMPRESSION_FLAGS="-cJvf"
-
-if [ "${RELEASE_NAME}" = "mainline" ]; then
-    DIR_NAME="${REV_NAME}"
-else
-    DIR_NAME="${REV_NAME}_${RELEASE_NAME}"
-fi
-
-mkdir "$DIR_NAME"
-
-cp build/bin/yuzu-cmd "$DIR_NAME"
-cp build/bin/yuzu "$DIR_NAME"
-
-. .ci/scripts/common/post-upload.sh

.ci/scripts/common/post-upload.sh

@@ -9,5 +9,11 @@ cp "${REV_NAME}-source.tar.xz" "$DIR_NAME"
 
 tar $COMPRESSION_FLAGS "$ARCHIVE_NAME" "$DIR_NAME"
 
+mv "$DIR_NAME" $RELEASE_NAME
+mv "${REV_NAME}-source.tar.xz" $RELEASE_NAME
+
+7z a "$REV_NAME.7z" $RELEASE_NAME
+
 # move the compiled archive into the artifacts directory to be uploaded by travis releases
-mv "$ARCHIVE_NAME" "${ARTIFACTS_DIR}/"
+mv "$ARCHIVE_NAME" artifacts/
+mv "$REV_NAME.7z" artifacts/

.ci/scripts/common/pre-upload.sh

@@ -2,6 +2,5 @@
 
 GITDATE="`git show -s --date=short --format='%ad' | sed 's/-//g'`"
 GITREV="`git show -s --format='%h'`"
-ARTIFACTS_DIR="artifacts"
 
-mkdir -p "${ARTIFACTS_DIR}/"
+mkdir -p artifacts

.ci/scripts/format/script.sh

@@ -7,7 +7,7 @@ if grep -nrI '\s$' src *.yml *.txt *.md Doxyfile .gitignore .gitmodules .ci* dis
 fi
 
 # Default clang-format points to default 3.5 version one
-CLANG_FORMAT=clang-format-12
+CLANG_FORMAT=clang-format-6.0
 $CLANG_FORMAT --version
 
 if [ "$TRAVIS_EVENT_TYPE" = "pull_request" ]; then

.ci/scripts/linux/docker.sh

@@ -1,60 +1,14 @@
 #!/bin/bash -ex
 
-# Exit on error, rather than continuing with the rest of the script.
-set -e
-
 cd /yuzu
 
 ccache -s
 
 mkdir build || true && cd build
-cmake .. \
-      -DBoost_USE_STATIC_LIBS=ON \
-      -DCMAKE_BUILD_TYPE=Release \
-      -DCMAKE_CXX_COMPILER=/usr/lib/ccache/g++ \
-      -DCMAKE_C_COMPILER=/usr/lib/ccache/gcc \
-      -DCMAKE_INSTALL_PREFIX="/usr" \
-      -DDISPLAY_VERSION=$1 \
-      -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON \
-      -DENABLE_QT_TRANSLATION=ON \
-      -DUSE_DISCORD_PRESENCE=ON \
-      -DYUZU_ENABLE_COMPATIBILITY_REPORTING=${ENABLE_COMPATIBILITY_REPORTING:-"OFF"} \
-      -DYUZU_USE_BUNDLED_FFMPEG=ON
+cmake .. -G Ninja -DDISPLAY_VERSION=$1 -DYUZU_USE_BUNDLED_UNICORN=ON -DYUZU_USE_QT_WEB_ENGINE=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=/usr/lib/ccache/gcc -DCMAKE_CXX_COMPILER=/usr/lib/ccache/g++ -DYUZU_ENABLE_COMPATIBILITY_REPORTING=${ENABLE_COMPATIBILITY_REPORTING:-"OFF"} -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DUSE_DISCORD_PRESENCE=ON
 
-make -j$(nproc)
+ninja
 
 ccache -s
 
 ctest -VV -C Release
-
-make install DESTDIR=AppDir
-rm -vf AppDir/usr/bin/yuzu-cmd AppDir/usr/bin/yuzu-tester
-
-# Download tools needed to build an AppImage
-wget -nc https://github.com/yuzu-emu/ext-linux-bin/raw/main/appimage/linuxdeploy-x86_64.AppImage
-wget -nc https://github.com/yuzu-emu/ext-linux-bin/raw/main/appimage/linuxdeploy-plugin-qt-x86_64.AppImage
-wget -nc https://github.com/yuzu-emu/ext-linux-bin/raw/main/appimage/AppRun-patched-x86_64
-wget -nc https://github.com/yuzu-emu/ext-linux-bin/raw/main/appimage/exec-x86_64.so
-# Set executable bit
-chmod 755 \
-    AppRun-patched-x86_64 \
-    exec-x86_64.so \
-    linuxdeploy-x86_64.AppImage \
-    linuxdeploy-plugin-qt-x86_64.AppImage
-
-# Workaround for https://github.com/AppImage/AppImageKit/issues/828
-export APPIMAGE_EXTRACT_AND_RUN=1
-
-mkdir -p AppDir/usr/optional
-mkdir -p AppDir/usr/optional/libstdc++
-mkdir -p AppDir/usr/optional/libgcc_s
-
-# Deploy yuzu's needed dependencies
-./linuxdeploy-x86_64.AppImage --appdir AppDir --plugin qt
-
-# Workaround for building yuzu with GCC 10 but also trying to distribute it to Ubuntu 18.04 et al.
-# See https://github.com/darealshinji/AppImageKit-checkrt
-cp exec-x86_64.so AppDir/usr/optional/exec.so
-cp AppRun-patched-x86_64 AppDir/AppRun
-cp --dereference /usr/lib/x86_64-linux-gnu/libstdc++.so.6 AppDir/usr/optional/libstdc++/libstdc++.so.6
-cp --dereference /lib/x86_64-linux-gnu/libgcc_s.so.1 AppDir/usr/optional/libgcc_s/libgcc_s.so.1

.ci/scripts/linux/upload.sh

@@ -2,7 +2,6 @@
 
 . .ci/scripts/common/pre-upload.sh
 
-APPIMAGE_NAME="yuzu-${GITDATE}-${GITREV}.AppImage"
 REV_NAME="yuzu-linux-${GITDATE}-${GITREV}"
 ARCHIVE_NAME="${REV_NAME}.tar.xz"
 COMPRESSION_FLAGS="-cJvf"
@@ -18,24 +17,4 @@ mkdir "$DIR_NAME"
 cp build/bin/yuzu-cmd "$DIR_NAME"
 cp build/bin/yuzu "$DIR_NAME"
 
-# Build an AppImage
-cd build
-
-wget -nc https://github.com/yuzu-emu/ext-linux-bin/raw/main/appimage/appimagetool-x86_64.AppImage
-chmod 755 appimagetool-x86_64.AppImage
-
-if [ "${RELEASE_NAME}" = "mainline" ]; then
-    # Generate update information if releasing to mainline
-    ./appimagetool-x86_64.AppImage -u "gh-releases-zsync|yuzu-emu|yuzu-${RELEASE_NAME}|latest|yuzu-*.AppImage.zsync" AppDir "${APPIMAGE_NAME}"
-else
-    ./appimagetool-x86_64.AppImage AppDir "${APPIMAGE_NAME}"
-fi
-cd ..
-
-# Copy the AppImage and update info to the artifacts directory and avoid compressing it
-cp "build/${APPIMAGE_NAME}" "${ARTIFACTS_DIR}/"
-if [ -f "build/${APPIMAGE_NAME}.zsync" ]; then
-    cp "build/${APPIMAGE_NAME}.zsync" "${ARTIFACTS_DIR}/"
-fi
-
 . .ci/scripts/common/post-upload.sh

.ci/scripts/merge/apply-patches-by-label.py

@@ -1,7 +1,7 @@
 # Download all pull requests as patches that match a specific label
 # Usage: python download-patches-by-label.py <Label to Match> <Root Path Folder to DL to>
 
-import requests, sys, json, urllib3.request, shutil, subprocess, os, traceback
+import requests, sys, json, urllib3.request, shutil, subprocess, os
 
 tagline = sys.argv[2]
 
@@ -33,5 +33,4 @@ try:
     for i in range(1,30):
         do_page(i)
 except:
-    traceback.print_exc(file=sys.stdout)
     sys.exit(-1)

.ci/scripts/transifex/docker.sh

@@ -1,25 +0,0 @@
-#!/bin/bash -e
-
-# Setup RC file for tx
-cat << EOF > ~/.transifexrc
-[https://www.transifex.com]
-hostname = https://www.transifex.com
-username = api
-password = $TRANSIFEX_API_TOKEN
-EOF
-
-
-set -x
-
-echo -e "\e[1m\e[33mBuild tools information:\e[0m"
-cmake --version
-gcc -v
-tx --version
-
-mkdir build && cd build
-cmake .. -DENABLE_QT_TRANSLATION=ON -DGENERATE_QT_TRANSLATION=ON -DCMAKE_BUILD_TYPE=Release -DENABLE_SDL2=OFF
-make translation
-cd ..
-
-cd dist/languages
-tx push -s

.ci/scripts/windows/docker.sh

@@ -5,7 +5,7 @@ cd /yuzu
 ccache -s
 
 mkdir build || true && cd build
-cmake .. -G Ninja -DDISPLAY_VERSION=$1 -DCMAKE_TOOLCHAIN_FILE="$(pwd)/../CMakeModules/MinGWCross.cmake" -DUSE_CCACHE=ON -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DCMAKE_BUILD_TYPE=Release -DENABLE_QT_TRANSLATION=ON
+cmake .. -G Ninja -DDISPLAY_VERSION=$1 -DCMAKE_TOOLCHAIN_FILE="$(pwd)/../CMakeModules/MinGWCross.cmake" -DUSE_CCACHE=ON -DYUZU_USE_BUNDLED_UNICORN=ON -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DCMAKE_BUILD_TYPE=Release
 ninja
 
 ccache -s
@@ -18,20 +18,19 @@ cd ..
 mkdir package
 
 if [ -d "/usr/x86_64-w64-mingw32/lib/qt5/plugins/platforms/" ]; then
-  QT_PLUGINS_PATH='/usr/x86_64-w64-mingw32/lib/qt5/plugins'
+  QT_PLATFORM_DLL_PATH='/usr/x86_64-w64-mingw32/lib/qt5/plugins/platforms/'
 else
   #fallback to qt
-  QT_PLUGINS_PATH='/usr/x86_64-w64-mingw32/lib/qt/plugins'
+  QT_PLATFORM_DLL_PATH='/usr/x86_64-w64-mingw32/lib/qt/plugins/platforms/'
 fi
 
 find build/ -name "yuzu*.exe" -exec cp {} 'package' \;
 
 # copy Qt plugins
 mkdir package/platforms
-cp -v "${QT_PLUGINS_PATH}/platforms/qwindows.dll" package/platforms/
-cp -rv "${QT_PLUGINS_PATH}/mediaservice/" package/
-cp -rv "${QT_PLUGINS_PATH}/imageformats/" package/
-cp -rv "${QT_PLUGINS_PATH}/styles/" package/
+cp "${QT_PLATFORM_DLL_PATH}/qwindows.dll" package/platforms/
+cp -rv "${QT_PLATFORM_DLL_PATH}/../mediaservice/" package/
+cp -rv "${QT_PLATFORM_DLL_PATH}/../imageformats/" package/
 rm -f package/mediaservice/*d.dll
 
 for i in package/*.exe; do
@@ -43,11 +42,3 @@ done
 pip3 install pefile
 python3 .ci/scripts/windows/scan_dll.py package/*.exe "package/"
 python3 .ci/scripts/windows/scan_dll.py package/imageformats/*.dll "package/"
-
-# copy FFmpeg libraries
-EXTERNALS_PATH="$(pwd)/build/externals"
-FFMPEG_DLL_PATH="$(find ${EXTERNALS_PATH} -maxdepth 1 -type d | grep ffmpeg)/bin"
-find ${FFMPEG_DLL_PATH} -type f -regex ".*\.dll" -exec cp -v {} package/ ';'
-
-# copy libraries from yuzu.exe path
-find "$(pwd)/build/bin/" -type f -regex ".*\.dll" -exec cp -v {} package/ ';'

.ci/scripts/windows/upload.sh

@@ -3,8 +3,8 @@
 . .ci/scripts/common/pre-upload.sh
 
 REV_NAME="yuzu-windows-mingw-${GITDATE}-${GITREV}"
-ARCHIVE_NAME="${REV_NAME}.tar.xz"
-COMPRESSION_FLAGS="-cJvf"
+ARCHIVE_NAME="${REV_NAME}.tar.gz"
+COMPRESSION_FLAGS="-czvf"
 
 if [ "${RELEASE_NAME}" = "mainline" ]; then
     DIR_NAME="${REV_NAME}"

.ci/templates/build-msvc.yml

@@ -4,11 +4,9 @@ parameters:
   version: ''
 
 steps:
-- script: choco install vulkan-sdk
-  displayName: 'Install vulkan-sdk'
 - script: python -m pip install --upgrade pip conan
   displayName: 'Install conan'
-- script: refreshenv && mkdir build && cd build && cmake -G "Visual Studio 16 2019" -A x64 -DYUZU_USE_BUNDLED_QT=1 -DYUZU_USE_BUNDLED_SDL2=1 -DYUZU_USE_QT_WEB_ENGINE=ON -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DYUZU_ENABLE_COMPATIBILITY_REPORTING=${COMPAT} -DUSE_DISCORD_PRESENCE=ON -DENABLE_QT_TRANSLATION=ON -DDISPLAY_VERSION=${{ parameters['version'] }} -DCMAKE_BUILD_TYPE=Release .. && cd ..
+- script: mkdir build && cd build && cmake -G "Visual Studio 16 2019" -A x64 --config Release -DYUZU_USE_BUNDLED_QT=1 -DYUZU_USE_BUNDLED_UNICORN=1 -DYUZU_USE_QT_WEB_ENGINE=ON -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DYUZU_ENABLE_COMPATIBILITY_REPORTING=${COMPAT} -DUSE_DISCORD_PRESENCE=ON -DDISPLAY_VERSION=${{ parameters['version'] }} .. && cd ..
   displayName: 'Configure CMake'
 - task: MSBuild@1
   displayName: 'Build'

.ci/templates/build-standard.yml

@@ -12,9 +12,6 @@ jobs:
       windows:
         BuildSuffix: 'windows-mingw'
         ScriptFolder: 'windows'
-      clang:
-        BuildSuffix: 'clang'
-        ScriptFolder: 'clang'
       linux:
         BuildSuffix: 'linux'
         ScriptFolder: 'linux'
@@ -27,4 +24,4 @@ jobs:
     parameters:
       artifactSource: 'false'
       cache: $(parameters.cache)
-      version: $(parameters.version)
+      version: $(parameters.version)

.ci/templates/merge-private.yml

@@ -1,8 +1,6 @@
 jobs:
 - job: merge
   displayName: 'pull requests'
-  pool:
-    vmImage: 'ubuntu-latest'
   steps:
   - checkout: self
     submodules: recursive
@@ -26,8 +24,6 @@ jobs:
 - job: upload_source
   displayName: 'upload'
   dependsOn: merge
-  pool:
-    vmImage: 'ubuntu-latest'
   steps:
   - template: ./sync-source.yml
     parameters:

.ci/templates/merge.yml

@@ -1,8 +1,6 @@
 jobs:
 - job: merge
   displayName: 'pull requests'
-  pool:
-    vmImage: 'ubuntu-latest'
   steps:
   - checkout: self
     submodules: recursive
@@ -25,8 +23,6 @@ jobs:
 - job: upload_source
   displayName: 'upload'
   dependsOn: merge
-  pool:
-    vmImage: 'ubuntu-latest'
   steps:
   - template: ./sync-source.yml
     parameters:

.ci/yuzu-mainline-step1.yml

@@ -1,9 +1,6 @@
 trigger:
 - master
 
-pool:
-  vmImage: 'ubuntu-latest'
-
 stages:
 - stage: merge
   displayName: 'merge'

.ci/yuzu-mainline-step2.yml

@@ -19,7 +19,6 @@ stages:
   displayName: 'build'
   jobs:
   - job: build
-    timeoutInMinutes: 120
     displayName: 'standard'
     pool:
       vmImage: ubuntu-latest
@@ -44,7 +43,6 @@ stages:
   displayName: 'build-windows'
   jobs:
   - job: build
-    timeoutInMinutes: 120
     displayName: 'msvc'
     pool:
       vmImage: windows-2019
@@ -66,7 +64,5 @@ stages:
   jobs:
   - job: github
     displayName: 'github'
-    pool:
-      vmImage: ubuntu-latest
     steps:
-    - template: ./templates/release-github.yml
+    - template: ./templates/release-github.yml

.ci/yuzu-patreon-step1.yml

@@ -1,9 +1,6 @@
 trigger:
 - master
 
-pool:
-  vmImage: 'ubuntu-latest'
-
 stages:
 - stage: merge
   displayName: 'merge'

.ci/yuzu-patreon-step2.yml

@@ -9,7 +9,6 @@ stages:
   displayName: 'build'
   jobs:
   - job: build
-    timeoutInMinutes: 120
     displayName: 'windows-msvc'
     pool:
       vmImage: windows-2019
@@ -29,7 +28,5 @@ stages:
   jobs:
     - job: release
       displayName: 'source'
-      pool:
-        vmImage: 'ubuntu-latest'
       steps:
         - template: ./templates/release-private-tag.yml

.github/ISSUE_TEMPLATE.md

@@ -1,13 +1,4 @@
----
-name: Bug Report / Feature Request
-about: Tech support does not belong here. You should only file an issue here if you think you have experienced an actual bug with yuzu or you are requesting a feature you believe would make yuzu better.
-title: ''
-labels: ''
-assignees: ''
-
----
-
-<!---
+<!--
 Please keep in mind yuzu is EXPERIMENTAL SOFTWARE.
 
 Please read the FAQ:

.github/ISSUE_TEMPLATE/config.yml

@@ -1,8 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: yuzu Discord
-    url: https://discord.com/invite/u77vRWY
-    about: If you are experiencing an issue with yuzu, and you need tech support, or if you have a general question, try asking in the official yuzu Discord linked here. Piracy is not allowed.
-  - name: Community forums
-    url: https://community.citra-emu.org
-    about: This is an alternative place for tech support, however helpers there are not as active.

.github/workflows/ci.yml

@@ -1,23 +0,0 @@
-name: yuzu-ci
-
-on:
-  push:
-    branches: [ master ]
-    tags: [ "*" ]
-  pull_request:
-    branches: [ master ]
-
-jobs:
-  transifex:
-    runs-on: ubuntu-latest
-    container: yuzuemu/build-environments:linux-transifex
-    if: ${{ github.repository == 'yuzu-emu/yuzu' && !github.head_ref }}
-    steps:
-      - uses: actions/checkout@v2
-        with:
-          submodules: recursive
-          fetch-depth: 0   
-      - name: Update Translation
-        run: ./.ci/scripts/transifex/docker.sh
-        env:
-          TRANSIFEX_API_TOKEN: ${{ secrets.TRANSIFEX_API_TOKEN }}

.gitmodules

@@ -1,24 +1,24 @@
 [submodule "inih"]
     path = externals/inih/inih
-    url = https://github.com/benhoyt/inih.git
+    url = https://github.com/svn2github/inih
 [submodule "cubeb"]
     path = externals/cubeb
     url = https://github.com/kinetiknz/cubeb.git
 [submodule "dynarmic"]
     path = externals/dynarmic
     url = https://github.com/MerryMage/dynarmic.git
+[submodule "unicorn"]
+    path = externals/unicorn
+    url = https://github.com/yuzu-emu/unicorn
 [submodule "soundtouch"]
     path = externals/soundtouch
     url = https://github.com/citra-emu/ext-soundtouch.git
 [submodule "libressl"]
     path = externals/libressl
     url = https://github.com/citra-emu/ext-libressl-portable.git
-[submodule "libusb"]
-	path = externals/libusb/libusb
-	url = https://github.com/libusb/libusb.git
 [submodule "discord-rpc"]
     path = externals/discord-rpc
-    url = https://github.com/discord/discord-rpc.git
+    url = https://github.com/discordapp/discord-rpc.git
 [submodule "Vulkan-Headers"]
     path = externals/Vulkan-Headers
     url = https://github.com/KhronosGroup/Vulkan-Headers.git
@@ -27,19 +27,16 @@
     url = https://github.com/ReinUsesLisp/sirit
 [submodule "mbedtls"]
     path = externals/mbedtls
-    url = https://github.com/yuzu-emu/mbedtls
+    url = https://github.com/DarkLordZach/mbedtls
+[submodule "libzip"]
+    path = externals/libzip/libzip
+    url = https://github.com/nih-at/libzip.git
 [submodule "xbyak"]
     path = externals/xbyak
     url = https://github.com/herumi/xbyak.git
+[submodule "externals/libusb"]
+	path = externals/libusb
+	url = https://github.com/ameerj/libusb
 [submodule "opus"]
 	path = externals/opus/opus
 	url = https://github.com/xiph/opus.git
-[submodule "ffmpeg"]
-	path = externals/ffmpeg
-	url = https://git.ffmpeg.org/ffmpeg.git
-[submodule "SDL"]
-	path = externals/SDL
-	url = https://github.com/libsdl-org/SDL.git
-[submodule "externals/cpp-httplib"]
-	path = externals/cpp-httplib
-	url = https://github.com/yhirose/cpp-httplib.git

.lgtm.yml

@@ -1,10 +0,0 @@
-path_classifiers:
-  library: "externals"
-extraction:
-  cpp:
-    prepare:
-      packages:
-      - "libsdl2-dev"
-      - "qtmultimedia5-dev"
-      - "libtbb-dev"
-      - "libjack-jackd2-dev"

.travis.yml

@@ -0,0 +1,59 @@
+language: cpp
+matrix:
+  include:
+    - os: linux
+      env: NAME="clang-format"
+      sudo: required
+      dist: trusty
+      services: docker
+      install: "./.travis/clang-format/deps.sh"
+      script: "./.travis/clang-format/build.sh"
+    - os: linux
+      env: NAME="linux build"
+      sudo: required
+      dist: trusty
+      services: docker
+      addons:
+        apt:
+          packages:
+            - p7zip-full
+      install: "./.travis/linux/deps.sh"
+      script: "./.travis/linux/build.sh"
+      after_success: "./.travis/linux/upload.sh"
+      cache: ccache
+    - os: osx
+      env: NAME="macos build"
+      sudo: false
+      osx_image: xcode10.2
+      install: "./.travis/macos/deps.sh"
+      script: "./.travis/macos/build.sh"
+      after_success: "./.travis/macos/upload.sh"
+      cache: ccache
+    - os: linux
+      env: NAME="MinGW build"
+      sudo: required
+      dist: trusty
+      services: docker
+      addons:
+        apt:
+          packages:
+            - p7zip-full
+      install: "./.travis/linux-mingw/deps.sh"
+      script: "./.travis/linux-mingw/build.sh"
+      after_success: "./.travis/linux-mingw/upload.sh"
+      cache: ccache
+
+deploy:
+  provider: releases
+  api_key:
+    secure: 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
+  file_glob: true
+  file: "artifacts/*"
+  skip_cleanup: true
+  on:
+    tags: true
+
+notifications:
+  webhooks:
+    urls:
+      - https://api.yuzu-emu.org/code/travis/notify

.travis/clang-format/build.sh

@@ -0,0 +1,3 @@
+#!/bin/bash -ex
+
+docker run --env-file .travis/common/travis-ci.env -v $(pwd):/yuzu -v "$HOME/.ccache":/root/.ccache citraemu/build-environments:linux-clang-format /bin/bash -ex /yuzu/.travis/clang-format/docker.sh

.travis/clang-format/deps.sh

@@ -0,0 +1,3 @@
+#!/bin/sh -ex
+
+docker pull citraemu/build-environments:linux-clang-format

.travis/clang-format/docker.sh

@@ -0,0 +1,5 @@
+#!/bin/bash -ex
+
+# Run clang-format
+cd /yuzu
+./.travis/clang-format/script.sh

.travis/clang-format/script.sh

@@ -0,0 +1,37 @@
+#!/bin/bash -ex
+
+if grep -nrI '\s$' src *.yml *.txt *.md Doxyfile .gitignore .gitmodules .travis* dist/*.desktop \
+                 dist/*.svg dist/*.xml; then
+    echo Trailing whitespace found, aborting
+    exit 1
+fi
+
+# Default clang-format points to default 3.5 version one
+CLANG_FORMAT=clang-format-6.0
+$CLANG_FORMAT --version
+
+if [ "$TRAVIS_EVENT_TYPE" = "pull_request" ]; then
+    # Get list of every file modified in this pull request
+    files_to_lint="$(git diff --name-only --diff-filter=ACMRTUXB $TRAVIS_COMMIT_RANGE | grep '^src/[^.]*[.]\(cpp\|h\)$' || true)"
+else
+    # Check everything for branch pushes
+    files_to_lint="$(find src/ -name '*.cpp' -or -name '*.h')"
+fi
+
+# Turn off tracing for this because it's too verbose
+set +x
+
+for f in $files_to_lint; do
+    d=$(diff -u "$f" <($CLANG_FORMAT "$f") || true)
+    if ! [ -z "$d" ]; then
+        echo "!!! $f not compliant to coding style, here is the fix:"
+        echo "$d"
+        fail=1
+    fi
+done
+
+set -x
+
+if [ "$fail" = 1 ]; then
+    exit 1
+fi

.travis/common/post-upload.sh

@@ -0,0 +1,25 @@
+#!/bin/bash -ex
+
+# Copy documentation
+cp license.txt "$REV_NAME"
+cp README.md "$REV_NAME"
+
+tar $COMPRESSION_FLAGS "$ARCHIVE_NAME" "$REV_NAME"
+
+# Find out what release we are building
+if [ -z $TRAVIS_TAG ]; then
+    RELEASE_NAME=head
+else
+    RELEASE_NAME=$(echo $TRAVIS_TAG | cut -d- -f1)
+    if [ "$NAME" = "MinGW build" ]; then
+        RELEASE_NAME="${RELEASE_NAME}-mingw"
+    fi
+fi
+
+mv "$REV_NAME" $RELEASE_NAME
+
+7z a "$REV_NAME.7z" $RELEASE_NAME
+
+# move the compiled archive into the artifacts directory to be uploaded by travis releases
+mv "$ARCHIVE_NAME" artifacts/
+mv "$REV_NAME.7z" artifacts/

.travis/common/pre-upload.sh

@@ -0,0 +1,6 @@
+#!/bin/bash -ex
+
+GITDATE="`git show -s --date=short --format='%ad' | sed 's/-//g'`"
+GITREV="`git show -s --format='%h'`"
+
+mkdir -p artifacts

.travis/common/travis-ci.env

@@ -0,0 +1,18 @@
+# List of environment variables to be shared with Docker containers
+CI
+TRAVIS
+CONTINUOUS_INTEGRATION
+TRAVIS_BRANCH
+TRAVIS_BUILD_ID
+TRAVIS_BUILD_NUMBER
+TRAVIS_COMMIT
+TRAVIS_COMMIT_RANGE
+TRAVIS_EVENT_TYPE
+TRAVIS_JOB_ID
+TRAVIS_JOB_NUMBER
+TRAVIS_REPO_SLUG
+TRAVIS_TAG
+
+# yuzu specific flags
+ENABLE_COMPATIBILITY_REPORTING
+USE_DISCORD_PRESENCE

.travis/linux-mingw/build.sh

@@ -0,0 +1,3 @@
+#!/bin/bash -ex
+mkdir "$HOME/.ccache" || true
+docker run --env-file .travis/common/travis-ci.env -v $(pwd):/yuzu -v "$HOME/.ccache":/root/.ccache yuzuemu/build-environments:linux-mingw /bin/bash -ex /yuzu/.travis/linux-mingw/docker.sh

.travis/linux-mingw/deps.sh

@@ -0,0 +1,3 @@
+#!/bin/sh -ex
+
+docker pull yuzuemu/build-environments:linux-mingw

.travis/linux-mingw/docker.sh

@@ -0,0 +1,50 @@
+#!/bin/bash -ex
+
+cd /yuzu
+# override Travis CI unreasonable ccache size
+echo 'max_size = 3.0G' > "$HOME/.ccache/ccache.conf"
+
+# Dirty hack to trick unicorn makefile into believing we are in a MINGW system
+mv /bin/uname /bin/uname1 && echo -e '#!/bin/sh\necho MINGW64' >> /bin/uname
+chmod +x /bin/uname
+
+# Dirty hack to trick unicorn makefile into believing we have cmd
+echo '' >> /bin/cmd
+chmod +x /bin/cmd
+
+mkdir build && cd build
+cmake .. -G Ninja -DCMAKE_TOOLCHAIN_FILE="$(pwd)/../CMakeModules/MinGWCross.cmake" -DUSE_CCACHE=ON -DYUZU_USE_BUNDLED_UNICORN=ON -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DCMAKE_BUILD_TYPE=Release
+ninja
+
+# Clean up the dirty hacks
+rm /bin/uname && mv /bin/uname1 /bin/uname
+rm /bin/cmd
+
+ccache -s
+
+echo "Tests skipped"
+#ctest -VV -C Release
+
+echo 'Prepare binaries...'
+cd ..
+mkdir package
+
+QT_PLATFORM_DLL_PATH='/usr/x86_64-w64-mingw32/lib/qt5/plugins/platforms/'
+find build/ -name "yuzu*.exe" -exec cp {} 'package' \;
+
+# copy Qt plugins
+mkdir package/platforms
+cp "${QT_PLATFORM_DLL_PATH}/qwindows.dll" package/platforms/
+cp -rv "${QT_PLATFORM_DLL_PATH}/../mediaservice/" package/
+cp -rv "${QT_PLATFORM_DLL_PATH}/../imageformats/" package/
+rm -f package/mediaservice/*d.dll
+
+for i in package/*.exe; do
+  # we need to process pdb here, however, cv2pdb
+  # does not work here, so we just simply strip all the debug symbols
+  x86_64-w64-mingw32-strip "${i}"
+done
+
+pip3 install pefile
+python3 .travis/linux-mingw/scan_dll.py package/*.exe "package/"
+python3 .travis/linux-mingw/scan_dll.py package/imageformats/*.dll "package/"

.travis/linux-mingw/scan_dll.py

@@ -0,0 +1,106 @@
+import pefile
+import sys
+import re
+import os
+import queue
+import shutil
+
+# constant definitions
+KNOWN_SYS_DLLS = ['WINMM.DLL', 'MSVCRT.DLL', 'VERSION.DLL', 'MPR.DLL',
+                  'DWMAPI.DLL', 'UXTHEME.DLL', 'DNSAPI.DLL', 'IPHLPAPI.DLL']
+# below is for Ubuntu 18.04 with specified PPA enabled, if you are using
+# other distro or different repositories, change the following accordingly
+DLL_PATH = [
+    '/usr/x86_64-w64-mingw32/bin/',
+    '/usr/x86_64-w64-mingw32/lib/',
+    '/usr/lib/gcc/x86_64-w64-mingw32/7.3-posix/'
+]
+
+missing = []
+
+
+def parse_imports(file_name):
+    results = []
+    pe = pefile.PE(file_name, fast_load=True)
+    pe.parse_data_directories()
+
+    for entry in pe.DIRECTORY_ENTRY_IMPORT:
+        current = entry.dll.decode()
+        current_u = current.upper()  # b/c Windows is often case insensitive
+        # here we filter out system dlls
+        # dll w/ names like *32.dll are likely to be system dlls
+        if current_u.upper() not in KNOWN_SYS_DLLS and not re.match(string=current_u, pattern=r'.*32\.DLL'):
+            results.append(current)
+
+    return results
+
+
+def parse_imports_recursive(file_name, path_list=[]):
+    q = queue.Queue()  # create a FIFO queue
+    # file_name can be a string or a list for the convience
+    if isinstance(file_name, str):
+        q.put(file_name)
+    elif isinstance(file_name, list):
+        for i in file_name:
+            q.put(i)
+    full_list = []
+    while q.qsize():
+        current = q.get_nowait()
+        print('> %s' % current)
+        deps = parse_imports(current)
+        # if this dll does not have any import, ignore it
+        if not deps:
+            continue
+        for dep in deps:
+            # the dependency already included in the list, skip
+            if dep in full_list:
+                continue
+            # find the requested dll in the provided paths
+            full_path = find_dll(dep)
+            if not full_path:
+                missing.append(dep)
+                continue
+            full_list.append(dep)
+            q.put(full_path)
+            path_list.append(full_path)
+    return full_list
+
+
+def find_dll(name):
+    for path in DLL_PATH:
+        for root, _, files in os.walk(path):
+            for f in files:
+                if name.lower() == f.lower():
+                    return os.path.join(root, f)
+
+
+def deploy(name, dst, dry_run=False):
+    dlls_path = []
+    parse_imports_recursive(name, dlls_path)
+    for dll_entry in dlls_path:
+        if not dry_run:
+            shutil.copy(dll_entry, dst)
+        else:
+            print('[Dry-Run] Copy %s to %s' % (dll_entry, dst))
+    print('Deploy completed.')
+    return dlls_path
+
+
+def main():
+    if len(sys.argv) < 3:
+        print('Usage: %s [files to examine ...] [target deploy directory]')
+        return 1
+    to_deploy = sys.argv[1:-1]
+    tgt_dir = sys.argv[-1]
+    if not os.path.isdir(tgt_dir):
+        print('%s is not a directory.' % tgt_dir)
+        return 1
+    print('Scanning dependencies...')
+    deploy(to_deploy, tgt_dir)
+    if missing:
+        print('Following DLLs are not found: %s' % ('\n'.join(missing)))
+    return 0
+
+
+if __name__ == '__main__':
+    main()

.travis/linux-mingw/upload.sh

@@ -0,0 +1,13 @@
+#!/bin/bash -ex
+
+. .travis/common/pre-upload.sh
+
+REV_NAME="yuzu-windows-mingw-${GITDATE}-${GITREV}"
+ARCHIVE_NAME="${REV_NAME}.tar.gz"
+COMPRESSION_FLAGS="-czvf"
+
+mkdir "$REV_NAME"
+# get around the permission issues
+cp -r package/* "$REV_NAME"
+
+. .travis/common/post-upload.sh

.travis/linux/build.sh

@@ -0,0 +1,4 @@
+#!/bin/bash -ex
+
+mkdir -p "$HOME/.ccache"
+docker run -e ENABLE_COMPATIBILITY_REPORTING --env-file .travis/common/travis-ci.env -v $(pwd):/yuzu -v "$HOME/.ccache":/root/.ccache yuzuemu/build-environments:linux-fresh /bin/bash /yuzu/.travis/linux/docker.sh

.travis/linux/deps.sh

@@ -0,0 +1,3 @@
+#!/bin/sh -ex
+
+docker pull yuzuemu/build-environments:linux-fresh

.travis/linux/docker.sh

@@ -0,0 +1,11 @@
+#!/bin/bash -ex
+
+cd /yuzu
+
+mkdir build && cd build
+cmake .. -G Ninja -DYUZU_USE_BUNDLED_UNICORN=ON -DYUZU_USE_QT_WEB_ENGINE=ON -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=/usr/lib/ccache/gcc -DCMAKE_CXX_COMPILER=/usr/lib/ccache/g++ -DYUZU_ENABLE_COMPATIBILITY_REPORTING=${ENABLE_COMPATIBILITY_REPORTING:-"OFF"} -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DUSE_DISCORD_PRESENCE=ON
+ninja
+
+ccache -s
+
+ctest -VV -C Release

.travis/linux/upload.sh

@@ -0,0 +1,14 @@
+#!/bin/bash -ex
+
+. .travis/common/pre-upload.sh
+
+REV_NAME="yuzu-linux-${GITDATE}-${GITREV}"
+ARCHIVE_NAME="${REV_NAME}.tar.xz"
+COMPRESSION_FLAGS="-cJvf"
+
+mkdir "$REV_NAME"
+
+cp build/bin/yuzu-cmd "$REV_NAME"
+cp build/bin/yuzu "$REV_NAME"
+
+. .travis/common/post-upload.sh

.travis/macos/build.sh

@@ -0,0 +1,18 @@
+#!/bin/bash -ex
+
+set -o pipefail
+
+export MACOSX_DEPLOYMENT_TARGET=10.14
+export Qt5_DIR=$(brew --prefix)/opt/qt5
+export UNICORNDIR=$(pwd)/externals/unicorn
+export PATH="/usr/local/opt/ccache/libexec:$PATH"
+
+# TODO: Build using ninja instead of make
+mkdir build && cd build
+cmake --version
+cmake .. -DYUZU_USE_BUNDLED_UNICORN=ON -DYUZU_USE_QT_WEB_ENGINE=ON -DCMAKE_BUILD_TYPE=Release -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DYUZU_ENABLE_COMPATIBILITY_REPORTING=${ENABLE_COMPATIBILITY_REPORTING:-"OFF"} -DUSE_DISCORD_PRESENCE=ON
+make -j4
+
+ccache -s
+
+ctest -VV -C Release

.travis/macos/deps.sh

@@ -0,0 +1,6 @@
+#!/bin/sh -ex
+
+brew update
+brew install p7zip qt5 sdl2 ccache
+brew outdated cmake || brew upgrade cmake
+pip3 install macpack

.travis/macos/upload.sh

@@ -0,0 +1,28 @@
+#!/bin/bash -ex
+
+. .travis/common/pre-upload.sh
+
+REV_NAME="yuzu-osx-${GITDATE}-${GITREV}"
+ARCHIVE_NAME="${REV_NAME}.tar.gz"
+COMPRESSION_FLAGS="-czvf"
+
+mkdir "$REV_NAME"
+
+cp build/bin/yuzu-cmd "$REV_NAME"
+cp -r build/bin/yuzu.app "$REV_NAME"
+
+# move libs into folder for deployment
+macpack "${REV_NAME}/yuzu.app/Contents/MacOS/yuzu" -d "../Frameworks"
+# move qt frameworks into app bundle for deployment
+$(brew --prefix)/opt/qt5/bin/macdeployqt "${REV_NAME}/yuzu.app" -executable="${REV_NAME}/yuzu.app/Contents/MacOS/yuzu"
+
+# move libs into folder for deployment
+macpack "${REV_NAME}/yuzu-cmd" -d "libs"
+
+# Make the launching script executable
+chmod +x ${REV_NAME}/yuzu.app/Contents/MacOS/yuzu
+
+# Verify loader instructions
+find "$REV_NAME" -exec otool -L {} \;
+
+. .travis/common/post-upload.sh

CMakeLists.txt

@@ -11,26 +11,22 @@ project(yuzu)
 # Set bundled sdl2/qt as dependent options.
 # OFF by default, but if ENABLE_SDL2 and MSVC are true then ON
 option(ENABLE_SDL2 "Enable the SDL2 frontend" ON)
-CMAKE_DEPENDENT_OPTION(YUZU_USE_BUNDLED_SDL2 "Download bundled SDL2 binaries" ON "ENABLE_SDL2;MSVC" OFF)
-# On Linux system SDL2 is likely to be lacking HIDAPI support which have drawbacks but is needed for SDL motion
-CMAKE_DEPENDENT_OPTION(YUZU_USE_EXTERNAL_SDL2 "Compile external SDL2" ON "ENABLE_SDL2;NOT MSVC" OFF)
 
 option(ENABLE_QT "Enable the Qt frontend" ON)
-option(ENABLE_QT_TRANSLATION "Enable translations for the Qt frontend" OFF)
-CMAKE_DEPENDENT_OPTION(YUZU_USE_BUNDLED_QT "Download bundled Qt binaries" "${MSVC}" "ENABLE_QT" OFF)
+CMAKE_DEPENDENT_OPTION(YUZU_USE_BUNDLED_QT "Download bundled Qt binaries" ON "ENABLE_QT;MSVC" OFF)
 
 option(ENABLE_WEB_SERVICE "Enable web services (telemetry, etc.)" ON)
 
-option(YUZU_USE_BUNDLED_BOOST "Download bundled Boost" OFF)
-
-option(YUZU_USE_BUNDLED_LIBUSB "Compile bundled libusb" OFF)
-
-option(YUZU_USE_BUNDLED_FFMPEG "Download/Build bundled FFmpeg" "${WIN32}")
+option(YUZU_USE_BUNDLED_UNICORN "Build/Download bundled Unicorn" ON)
 
 option(YUZU_USE_QT_WEB_ENGINE "Use QtWebEngine for web applet implementation" OFF)
 
+option(YUZU_ENABLE_BOXCAT "Enable the Boxcat service, a yuzu high-level implementation of BCAT" ON)
+
 option(ENABLE_CUBEB "Enables the cubeb audio backend" ON)
 
+option(ENABLE_VULKAN "Enables Vulkan backend" ON)
+
 option(USE_DISCORD_PRESENCE "Enables Discord Rich Presence" OFF)
 
 # Default to a Release build
@@ -41,10 +37,9 @@ if (NOT IS_MULTI_CONFIG AND NOT CMAKE_BUILD_TYPE)
 endif()
 
 if(EXISTS ${PROJECT_SOURCE_DIR}/hooks/pre-commit AND NOT EXISTS ${PROJECT_SOURCE_DIR}/.git/hooks/pre-commit)
-    if (EXISTS ${PROJECT_SOURCE_DIR}/.git/)
-        message(STATUS "Copying pre-commit hook")
-        file(COPY hooks/pre-commit DESTINATION ${PROJECT_SOURCE_DIR}/.git/hooks)
-    endif()
+    message(STATUS "Copying pre-commit hook")
+    file(COPY hooks/pre-commit
+        DESTINATION ${PROJECT_SOURCE_DIR}/.git/hooks)
 endif()
 
 # Sanity check : Check that all submodules are present
@@ -119,24 +114,12 @@ if (NOT DEFINED ARCHITECTURE)
 endif()
 message(STATUS "Target architecture: ${ARCHITECTURE}")
 
-if (UNIX)
-    add_definitions(-DYUZU_UNIX=1)
-endif()
 
 # Configure C++ standard
 # ===========================
 
-# boost asio's concept usage doesn't play nicely with some compilers yet.
-add_definitions(-DBOOST_ASIO_DISABLE_CONCEPTS)
-if (MSVC)
-    add_compile_options($<$<COMPILE_LANGUAGE:CXX>:/std:c++latest>)
-
-    # cubeb and boost still make use of deprecated result_of.
-    add_definitions(-D_HAS_DEPRECATED_RESULT_OF)
-else()
-    set(CMAKE_CXX_STANDARD 20)
-    set(CMAKE_CXX_STANDARD_REQUIRED ON)
-endif()
+set(CMAKE_CXX_STANDARD 17)
+set(CMAKE_CXX_STANDARD_REQUIRED ON)
 
 # Output binaries to bin/
 set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PROJECT_BINARY_DIR}/bin)
@@ -166,14 +149,15 @@ macro(yuzu_find_packages)
     # Capitalization matters here. We need the naming to match the generated paths from Conan
     set(REQUIRED_LIBS
     #    Cmake Pkg Prefix  Version     Conan Pkg
-        "Catch2            2.13        catch2/2.13.0"
-        "fmt               8.0         fmt/8.0.0"
+        "Boost             1.71        boost/1.72.0"
+        "Catch2            2.11        catch2/2.11.0"
+        "fmt               6.2         fmt/6.2.0"
+    # can't use until https://github.com/bincrafters/community/issues/1173
+        #"libzip            1.5         libzip/1.5.2@bincrafters/stable"
         "lz4               1.8         lz4/1.9.2"
-        "nlohmann_json     3.8         nlohmann_json/3.8.0"
+        "nlohmann_json     3.7         nlohmann_json/3.7.3"
         "ZLIB              1.2         zlib/1.2.11"
-        "zstd              1.5         zstd/1.5.0"
-    # can't use opus until AVX check is fixed: https://github.com/yuzu-emu/yuzu/pull/4068
-        #"opus              1.3         opus/1.3.1"
+        "zstd              1.4         zstd/1.4.4"
     )
 
     foreach(PACKAGE ${REQUIRED_LIBS})
@@ -200,44 +184,11 @@ macro(yuzu_find_packages)
     unset(FN_FORCE_REQUIRED)
 endmacro()
 
-if (NOT YUZU_USE_BUNDLED_BOOST)
-    find_package(Boost 1.73.0 CONFIG COMPONENTS context headers QUIET)
-endif()
-if (Boost_FOUND)
-    set(Boost_LIBRARIES Boost::boost)
-    # Conditionally add Boost::context only if the active version of the Conan or system Boost package provides it
-    # The old version is missing Boost::context, so we want to avoid adding in that case
-    # The new version requires adding Boost::context to prevent linking issues
-    #
-    # This one is used by Conan on subsequent CMake configures, not the first configure.
-    if (TARGET Boost::context)
-        list(APPEND Boost_LIBRARIES Boost::context)
-    endif()
-elseif (${CMAKE_SYSTEM_NAME} STREQUAL "Linux" OR YUZU_USE_BUNDLED_BOOST)
-    message(STATUS "Boost 1.73.0 or newer not found, falling back to externals")
-    set(YUZU_USE_BUNDLED_BOOST ON CACHE BOOL "Download bundled Boost" FORCE)
-
-    # Use yuzu Boost binaries
-    set(Boost_EXT_NAME "boost_1_75_0")
-    set(Boost_PATH "${CMAKE_BINARY_DIR}/externals/${Boost_EXT_NAME}")
-    download_bundled_external("boost/" ${Boost_EXT_NAME} "")
-    set(Boost_USE_DEBUG_RUNTIME FALSE)
-    set(Boost_USE_STATIC_LIBS ON)
-    find_package(Boost 1.75.0 CONFIG REQUIRED COMPONENTS context headers PATHS ${Boost_PATH} NO_DEFAULT_PATH)
-    # Manually set the include dirs since the find_package sets it incorrectly
-    set(Boost_INCLUDE_DIRS ${Boost_PATH}/include CACHE PATH "Path to Boost headers" FORCE)
-    include_directories(SYSTEM "${Boost_INCLUDE_DIRS}")
-else()
-    message(STATUS "Boost 1.73.0 or newer not found, falling back to Conan")
-    list(APPEND CONAN_REQUIRED_LIBS "boost/1.73.0")
-endif()
-
 # Attempt to locate any packages that are required and report the missing ones in CONAN_REQUIRED_LIBS
 yuzu_find_packages()
 
 # Qt5 requires that we find components, so it doesn't fit our pretty little find package function
 if(ENABLE_QT)
-    set(QT_VERSION 5.15)
     # We want to load the generated conan qt config so that we get the QT_ROOT var so that we can use the official
     # Qt5Config inside the root folder instead of the conan generated one.
     if(EXISTS ${CMAKE_BINARY_DIR}/qtConfig.cmake)
@@ -245,162 +196,40 @@ if(ENABLE_QT)
         list(APPEND CMAKE_MODULE_PATH "${CONAN_QT_ROOT_RELEASE}")
         list(APPEND CMAKE_PREFIX_PATH "${CONAN_QT_ROOT_RELEASE}")
     endif()
-
-    # Check for system Qt on Linux, fallback to bundled Qt
-    if (${CMAKE_SYSTEM_NAME} STREQUAL "Linux")
-        if (NOT YUZU_USE_BUNDLED_QT)
-            find_package(Qt5 ${QT_VERSION} COMPONENTS Widgets)
-        endif()
-        if (NOT Qt5_FOUND OR YUZU_USE_BUNDLED_QT)
-            # Check for dependencies, then enable bundled Qt download
-
-            # Check that the system GLIBCXX version is compatible
-            find_program(OBJDUMP objdump)
-            if ("${OBJDUMP}" STREQUAL "OBJDUMP-NOTFOUND")
-                message(FATAL_ERROR "Required program `objdump` not found.")
-            endif()
-            find_library(LIBSTDCXX libstdc++.so.6)
-            execute_process(
-                COMMAND
-                    ${OBJDUMP} -T ${LIBSTDCXX}
-                COMMAND
-                    grep GLIBCXX_3.4.28
-                COMMAND
-                    sed "s/[0-9a-f]*.*  //"
-                COMMAND
-                    sed "s/ .*//"
-                COMMAND
-                    sort -u
-                OUTPUT_VARIABLE
-                    GLIBCXX_MET
-            )
-            if (NOT GLIBCXX_MET)
-                message(FATAL_ERROR "Qt too old or not found, and bundled Qt package is not \
-                    compatible with this system. Either install Qt ${QT_VERSION}, or provide the path \
-                    to Qt by setting the variable Qt5_ROOT.")
-            endif()
-
-            # Check for headers
-            Include(FindPkgConfig REQUIRED)
-            pkg_check_modules(QT_DEP_GLU QUIET glu>=9.0.0)
-            if (NOT QT_DEP_GLU_FOUND)
-                message(FATAL_ERROR "Qt bundled pacakge dependency `glu` not found. \
-                    Perhaps `libglu1-mesa-dev` needs to be installed?")
-            endif()
-            pkg_check_modules(QT_DEP_MESA QUIET dri>=20.0.8)
-            if (NOT QT_DEP_MESA_FOUND)
-                message(FATAL_ERROR "Qt bundled pacakge dependency `dri` not found. \
-                    Perhaps `mesa-common-dev` needs to be installed?")
-            endif()
-
-            # Check for X libraries
-            set(BUNDLED_QT_REQUIREMENTS
-                libxcb-icccm.so.4
-                libxcb-image.so.0
-                libxcb-keysyms.so.1
-                libxcb-randr.so.0
-                libxcb-render-util.so.0
-                libxcb-render.so.0
-                libxcb-shape.so.0
-                libxcb-shm.so.0
-                libxcb-sync.so.1
-                libxcb-xfixes.so.0
-                libxcb-xinerama.so.0
-                libxcb-xkb.so.1
-                libxcb.so.1
-                libxkbcommon-x11.so.0
-                libxkbcommon.so.0
-            )
-            set(UNRESOLVED_QT_DEPS "")
-            foreach (REQUIREMENT ${BUNDLED_QT_REQUIREMENTS})
-                find_library(BUNDLED_QT_${REQUIREMENT} ${REQUIREMENT})
-                if ("${BUNDLED_QT_${REQUIREMENT}}" STREQUAL "BUNDLED_QT_${REQUIREMENT}-NOTFOUND")
-                    set(UNRESOLVED_QT_DEPS ${UNRESOLVED_QT_DEPS} ${REQUIREMENT})
-                endif()
-                unset(BUNDLED_QT_${REQUIREMENT})
-            endforeach()
-            unset(BUNDLED_QT_REQUIREMENTS)
-
-            if (NOT "${UNRESOLVED_QT_DEPS}" STREQUAL "")
-                message(FATAL_ERROR "Bundled Qt package missing required dependencies: ${UNRESOLVED_QT_DEPS}")
-            endif()
-
-            set(YUZU_USE_BUNDLED_QT ON CACHE BOOL "Download bundled Qt" FORCE)
-        endif()
-        if (YUZU_USE_BUNDLED_QT)
-            # Binary package currently does not support Qt webengine, so make sure it's disabled
-            set(YUZU_USE_QT_WEB_ENGINE OFF CACHE BOOL "Use Qt Webengine" FORCE)
-        endif()
-    endif()
-
-    set(YUZU_QT_NO_CMAKE_SYSTEM_PATH)
-
     # Workaround for an issue where conan tries to build Qt from scratch instead of download prebuilt binaries
     set(QT_PREFIX_HINT)
-
     if(YUZU_USE_BUNDLED_QT)
-        if ((MSVC_VERSION GREATER_EQUAL 1920 AND MSVC_VERSION LESS 1940) AND ARCHITECTURE_x86_64)
-            set(QT_BUILD qt-5.15.2-msvc2019_64)
-        elseif ((${CMAKE_SYSTEM_NAME} STREQUAL "Linux") AND NOT MINGW AND ARCHITECTURE_x86_64)
-            set(QT_BUILD qt5_5_15_2)
+        if ((MSVC_VERSION GREATER_EQUAL 1910 AND MSVC_VERSION LESS 1930) AND ARCHITECTURE_x86_64)
+            set(QT_VER qt-5.12.0-msvc2017_64)
         else()
             message(FATAL_ERROR "No bundled Qt binaries for your toolchain. Disable YUZU_USE_BUNDLED_QT and provide your own.")
         endif()
 
-        if (DEFINED QT_BUILD)
-            download_bundled_external("qt/" ${QT_BUILD} QT_PREFIX)
+        if (DEFINED QT_VER)
+            download_bundled_external("qt/" ${QT_VER} QT_PREFIX)
         endif()
 
         set(QT_PREFIX_HINT HINTS "${QT_PREFIX}")
-
-        set(YUZU_QT_NO_CMAKE_SYSTEM_PATH "NO_CMAKE_SYSTEM_PATH")
     endif()
-    find_package(Qt5 ${QT_VERSION} REQUIRED COMPONENTS Widgets ${QT_PREFIX_HINT} ${YUZU_QT_NO_CMAKE_SYSTEM_PATH})
+    find_package(Qt5 5.9 COMPONENTS Widgets OpenGL ${QT_PREFIX_HINT})
     if (YUZU_USE_QT_WEB_ENGINE)
         find_package(Qt5 COMPONENTS WebEngineCore WebEngineWidgets)
     endif()
-
-    if (ENABLE_QT_TRANSLATION)
-        find_package(Qt5 REQUIRED COMPONENTS LinguistTools ${QT_PREFIX_HINT})
+    if (NOT Qt5_FOUND)
+        list(APPEND CONAN_REQUIRED_LIBS "qt/5.14.1@bincrafters/stable")
     endif()
 endif()
-
 # find SDL2 exports a bunch of variables that are needed, so its easier to do this outside of the yuzu_find_package
-if (ENABLE_SDL2)
-    if (YUZU_USE_BUNDLED_SDL2)
-        # Detect toolchain and platform
-        if ((MSVC_VERSION GREATER_EQUAL 1920 AND MSVC_VERSION LESS 1940) AND ARCHITECTURE_x86_64)
-            set(SDL2_VER "SDL2-2.0.16")
-        else()
-            message(FATAL_ERROR "No bundled SDL2 binaries for your toolchain. Disable YUZU_USE_BUNDLED_SDL2 and provide your own.")
-        endif()
-
-        if (DEFINED SDL2_VER)
-            download_bundled_external("sdl2/" ${SDL2_VER} SDL2_PREFIX)
-        endif()
-
-        set(SDL2_FOUND YES)
-        set(SDL2_INCLUDE_DIR "${SDL2_PREFIX}/include" CACHE PATH "Path to SDL2 headers")
-        set(SDL2_LIBRARY "${SDL2_PREFIX}/lib/x64/SDL2.lib" CACHE PATH "Path to SDL2 library")
-        set(SDL2_DLL_DIR "${SDL2_PREFIX}/lib/x64/" CACHE PATH "Path to SDL2.dll")
-
-        add_library(SDL2 INTERFACE)
-        target_link_libraries(SDL2 INTERFACE "${SDL2_LIBRARY}")
-        target_include_directories(SDL2 INTERFACE "${SDL2_INCLUDE_DIR}")
-    elseif (YUZU_USE_EXTERNAL_SDL2)
-        message(STATUS "Using SDL2 from externals.")
-    else()
-        find_package(SDL2 2.0.16 REQUIRED)
-
-        # Some installations don't set SDL2_LIBRARIES
-        if("${SDL2_LIBRARIES}" STREQUAL "")
-            message(WARNING "SDL2_LIBRARIES wasn't set, manually setting to SDL2::SDL2")
-            set(SDL2_LIBRARIES "SDL2::SDL2")
-        endif()
-
-        include_directories(SYSTEM ${SDL2_INCLUDE_DIRS})
-        add_library(SDL2 INTERFACE)
-        target_link_libraries(SDL2 INTERFACE "${SDL2_LIBRARIES}")
+if(ENABLE_SDL2)
+    if(EXISTS ${CMAKE_BINARY_DIR}/sdl2Config.cmake)
+        include(${CMAKE_BINARY_DIR}/sdl2Config.cmake)
+        list(APPEND CMAKE_MODULE_PATH "${CONAN_SDL2_ROOT_RELEASE}")
+        list(APPEND CMAKE_PREFIX_PATH "${CONAN_SDL2_ROOT_RELEASE}")
+    endif()
+    find_package(SDL2)
+    if (NOT SDL2_FOUND)
+        # otherwise add this to the list of libraries to install
+        list(APPEND CONAN_REQUIRED_LIBS "sdl2/2.0.12@bincrafters/stable")
     endif()
 endif()
 
@@ -411,13 +240,19 @@ if (CONAN_REQUIRED_LIBS)
     # Download conan.cmake automatically, you can also just copy the conan.cmake file
     if(NOT EXISTS "${CMAKE_BINARY_DIR}/conan.cmake")
         message(STATUS "Downloading conan.cmake from https://github.com/conan-io/cmake-conan")
-        # TODO: Use a tagged release. The latest tagged release does not support VS2022 as of this writing.
-        file(DOWNLOAD "https://raw.githubusercontent.com/conan-io/cmake-conan/43e385830ee35377dbd2dcbe8d5a9e750301ea00/conan.cmake"
+        file(DOWNLOAD "https://github.com/conan-io/cmake-conan/raw/v0.15/conan.cmake"
                         "${CMAKE_BINARY_DIR}/conan.cmake")
     endif()
     include(${CMAKE_BINARY_DIR}/conan.cmake)
 
-    conan_check(VERSION 1.41.0 REQUIRED)
+    set(CONAN_LIB_OPTIONS
+        libzip:with_openssl=False
+        libzip:enable_windows_crypto=False
+    )
+    conan_check(VERSION 1.24.0 REQUIRED)
+    # Add the bincrafters remote
+    conan_add_remote(NAME bincrafters
+                    URL https://api.bintray.com/conan/bincrafters/public-conan)
 
     # Manually add iconv to fix a dep conflict between qt and sdl2
     # We don't need to add it through find_package or anything since the other two can find it just fine
@@ -448,26 +283,20 @@ if (CONAN_REQUIRED_LIBS)
     # this time with required, so we bail if its not found.
     yuzu_find_packages(FORCE_REQUIRED)
 
-    if (NOT Boost_FOUND)
-        find_package(Boost 1.73.0 REQUIRED COMPONENTS context headers)
-        set(Boost_LIBRARIES Boost::boost)
-        # Conditionally add Boost::context only if the active version of the Conan Boost package provides it
-        # The old version is missing Boost::context, so we want to avoid adding in that case
-        # The new version requires adding Boost::context to prevent linking issues
-        if (TARGET Boost::context)
-            list(APPEND Boost_LIBRARIES Boost::context)
-        endif()
-    endif()
-
     # Due to issues with variable scopes in functions, we need to also find_package(qt5) outside of the function
     if(ENABLE_QT)
         list(APPEND CMAKE_MODULE_PATH "${CONAN_QT_ROOT_RELEASE}")
         list(APPEND CMAKE_PREFIX_PATH "${CONAN_QT_ROOT_RELEASE}")
-        find_package(Qt5 5.15 REQUIRED COMPONENTS Widgets)
+        find_package(Qt5 5.9 REQUIRED COMPONENTS Widgets OpenGL)
         if (YUZU_USE_QT_WEB_ENGINE)
             find_package(Qt5 REQUIRED COMPONENTS WebEngineCore WebEngineWidgets)
         endif()
     endif()
+    if(ENABLE_SDL2)
+        list(APPEND CMAKE_MODULE_PATH "${CONAN_SDL2_ROOT_RELEASE}")
+        list(APPEND CMAKE_PREFIX_PATH "${CONAN_SDL2_ROOT_RELEASE}")
+        find_package(SDL2 REQUIRED)
+    endif()
 
 endif()
 
@@ -483,273 +312,108 @@ elseif (TARGET Boost::boost)
     add_library(boost ALIAS Boost::boost)
 endif()
 
+if (TARGET sdl2::sdl2)
+    # imported from the conan generated sdl2Config.cmake
+    set_target_properties(sdl2::sdl2 PROPERTIES IMPORTED_GLOBAL TRUE)
+    add_library(SDL2 ALIAS sdl2::sdl2)
+elseif(SDL2_FOUND)
+    # found through the system package manager
+    # Some installations don't set SDL2_LIBRARIES
+    if("${SDL2_LIBRARIES}" STREQUAL "")
+        message(WARNING "SDL2_LIBRARIES wasn't set, manually setting to SDL2::SDL2")
+        set(SDL2_LIBRARIES "SDL2::SDL2")
+    endif()
+
+    include_directories(SYSTEM ${SDL2_INCLUDE_DIRS})
+    add_library(SDL2 INTERFACE)
+    target_link_libraries(SDL2 INTERFACE "${SDL2_LIBRARIES}")
+endif()
+
 # Ensure libusb is properly configured (based on dolphin libusb include)
-if(NOT APPLE AND NOT YUZU_USE_BUNDLED_LIBUSB)
-    include(FindPkgConfig)
-    if (PKG_CONFIG_FOUND AND NOT CMAKE_SYSTEM_NAME MATCHES "DragonFly|FreeBSD")
-        pkg_check_modules(LIBUSB QUIET libusb-1.0>=1.0.24)
-    else()
-        find_package(LibUSB)
-    endif()
+find_package(LibUSB)
+add_subdirectory(externals/libusb)
+set(LIBUSB_LIBRARIES usb)
 
-    if (LIBUSB_FOUND)
-        add_library(usb INTERFACE)
-        target_include_directories(usb INTERFACE "${LIBUSB_INCLUDE_DIRS}")
-        target_link_libraries(usb INTERFACE "${LIBUSB_LIBRARIES}")
-    else()
-        message(WARNING "libusb not found, falling back to externals")
-        set(YUZU_USE_BUNDLED_LIBUSB ON)
-    endif()
-endif()
-
-# List of all FFmpeg components required
-set(FFmpeg_COMPONENTS
-    avcodec
-    avutil
-    swscale)
-
-if (${CMAKE_SYSTEM_NAME} STREQUAL "Linux")
-    Include(FindPkgConfig REQUIRED)
-    pkg_check_modules(LIBVA libva)
-endif()
-if (NOT YUZU_USE_BUNDLED_FFMPEG)
-    # Use system installed FFmpeg
-    find_package(FFmpeg QUIET COMPONENTS ${FFmpeg_COMPONENTS})
-
-    if (FFmpeg_FOUND)
-        # Overwrite aggregate defines from FFmpeg module to avoid over-linking libraries.
-        # Prevents shipping too many libraries with the AppImage.
-        set(FFmpeg_LIBRARIES "")
-        set(FFmpeg_INCLUDE_DIR "")
-
-        foreach(COMPONENT ${FFmpeg_COMPONENTS})
-            set(FFmpeg_LIBRARIES ${FFmpeg_LIBRARIES} ${FFmpeg_LIBRARY_${COMPONENT}} CACHE PATH "Paths to FFmpeg libraries" FORCE)
-            set(FFmpeg_INCLUDE_DIR ${FFmpeg_INCLUDE_DIR} ${FFmpeg_INCLUDE_${COMPONENT}} CACHE PATH "Path to FFmpeg headers" FORCE)
-        endforeach()
-    else()
-        message(WARNING "FFmpeg not found, falling back to externals")
-        set(YUZU_USE_BUNDLED_FFMPEG ON)
-    endif()
-endif()
-
-if (YUZU_USE_BUNDLED_FFMPEG)
-    if (NOT WIN32)
-        # TODO(lat9nq): Move this to externals/ffmpeg/CMakeLists.txt (and move externals/ffmpeg to
-        # externals/ffmpeg/ffmpeg)
-
-        # Build FFmpeg from externals
-        message(STATUS "Using FFmpeg from externals")
-
-        # FFmpeg has source that requires one of nasm or yasm to assemble it.
-        # REQUIRED throws an error if not found here during configuration rather than during compilation.
-        find_program(ASSEMBLER NAMES nasm yasm)
-        if ("${ASSEMBLER}" STREQUAL "ASSEMBLER-NOTFOUND")
-            message(FATAL_ERROR "One of either `nasm` or `yasm` not found but is required.")
-        endif()
-
-        find_program(AUTOCONF autoconf)
-        if ("${AUTOCONF}" STREQUAL "AUTOCONF-NOTFOUND")
-            message(FATAL_ERROR "Required program `autoconf` not found.")
-        endif()
-
-        set(FFmpeg_PREFIX ${PROJECT_SOURCE_DIR}/externals/ffmpeg)
-        set(FFmpeg_BUILD_DIR ${PROJECT_BINARY_DIR}/externals/ffmpeg)
-        set(FFmpeg_MAKEFILE ${FFmpeg_BUILD_DIR}/Makefile)
-        make_directory(${FFmpeg_BUILD_DIR})
-
-        # Read version string from external
-        file(READ ${FFmpeg_PREFIX}/RELEASE FFmpeg_VERSION)
-        set(FFmpeg_FOUND NO)
-        if (NOT FFmpeg_VERSION STREQUAL "")
-            set(FFmpeg_FOUND YES)
-        endif()
-
-        unset(FFmpeg_LIBRARIES CACHE)
-        foreach(COMPONENT ${FFmpeg_COMPONENTS})
-            set(FFmpeg_${COMPONENT}_PREFIX "${FFmpeg_BUILD_DIR}/lib${COMPONENT}")
-            set(FFmpeg_${COMPONENT}_LIB_NAME "lib${COMPONENT}.a")
-            set(FFmpeg_${COMPONENT}_LIBRARY "${FFmpeg_${COMPONENT}_PREFIX}/${FFmpeg_${COMPONENT}_LIB_NAME}")
-
-            set(FFmpeg_LIBRARIES
-                ${FFmpeg_LIBRARIES}
-                ${FFmpeg_${COMPONENT}_LIBRARY}
-                CACHE PATH "Paths to FFmpeg libraries" FORCE)
-        endforeach()
-
-        Include(FindPkgConfig REQUIRED)
-        pkg_check_modules(LIBVA libva)
-        pkg_check_modules(CUDA cuda)
-        pkg_check_modules(FFNVCODEC ffnvcodec)
-        pkg_check_modules(VDPAU vdpau)
-
-        set(FFmpeg_HWACCEL_LIBRARIES)
-        set(FFmpeg_HWACCEL_FLAGS)
-        set(FFmpeg_HWACCEL_INCLUDE_DIRS)
-        set(FFmpeg_HWACCEL_LDFLAGS)
-
-        if(LIBVA_FOUND)
-            pkg_check_modules(LIBDRM libdrm REQUIRED)
-            find_package(X11 REQUIRED)
-            pkg_check_modules(LIBVA-DRM libva-drm REQUIRED)
-            pkg_check_modules(LIBVA-X11 libva-x11 REQUIRED)
-            list(APPEND FFmpeg_HWACCEL_LIBRARIES
-                ${LIBDRM_LIBRARIES}
-                ${X11_LIBRARIES}
-                ${LIBVA-DRM_LIBRARIES}
-                ${LIBVA-X11_LIBRARIES}
-                ${LIBVA_LIBRARIES})
-            set(FFmpeg_HWACCEL_FLAGS
-                --enable-hwaccel=h264_vaapi
-                --enable-hwaccel=vp8_vaapi
-                --enable-hwaccel=vp9_vaapi
-                --enable-libdrm)
-            list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
-                ${LIBDRM_INCLUDE_DIRS}
-                ${X11_INCLUDE_DIRS}
-                ${LIBVA-DRM_INCLUDE_DIRS}
-                ${LIBVA-X11_INCLUDE_DIRS}
-                ${LIBVA_INCLUDE_DIRS}
-            )
-            message(STATUS "VA-API found")
-        else()
-            set(FFmpeg_HWACCEL_FLAGS --disable-vaapi)
-        endif()
-
-        if (FFNVCODEC_FOUND AND CUDA_FOUND)
-            list(APPEND FFmpeg_HWACCEL_FLAGS
-                --enable-cuvid
-                --enable-ffnvcodec
-                --enable-nvdec
-                --enable-hwaccel=h264_nvdec
-                --enable-hwaccel=vp8_nvdec
-                --enable-hwaccel=vp9_nvdec
-                --extra-cflags=-I${CUDA_INCLUDE_DIRS}
-            )
-            list(APPEND FFmpeg_HWACCEL_LIBRARIES
-                ${FFNVCODEC_LIBRARIES}
-                ${CUDA_LIBRARIES}
-            )
-            list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS
-                ${FFNVCODEC_INCLUDE_DIRS}
-                ${CUDA_INCLUDE_DIRS}
-            )
-            list(APPEND FFmpeg_HWACCEL_LDFLAGS
-                ${FFNVCODEC_LDFLAGS}
-                ${CUDA_LDFLAGS}
-            )
-            message(STATUS "ffnvcodec libraries version ${FFNVCODEC_VERSION} found")
-        endif()
-
-        if (VDPAU_FOUND)
-            list(APPEND FFmpeg_HWACCEL_FLAGS
-                --enable-vdpau
-                --enable-hwaccel=h264_vdpau
-                --enable-hwaccel=vp9_vdpau
-            )
-            list(APPEND FFmpeg_HWACCEL_LIBRARIES ${VDPAU_LIBRARIES})
-            list(APPEND FFmpeg_HWACCEL_INCLUDE_DIRS ${VDPAU_INCLUDE_DIRS})
-            list(APPEND FFmpeg_HWACCEL_LDFLAGS ${VDPAU_LDFLAGS})
-            message(STATUS "vdpau libraries version ${VDPAU_VERSION} found")
-        else()
-            list(APPEND FFmpeg_HWACCEL_FLAGS --disable-vdpau)
-        endif()
-
-        # `configure` parameters builds only exactly what yuzu needs from FFmpeg
-        # `--disable-vdpau` is needed to avoid linking issues
-        add_custom_command(
-            OUTPUT
-                ${FFmpeg_MAKEFILE}
-            COMMAND
-                /bin/bash ${FFmpeg_PREFIX}/configure
-                    --disable-avdevice
-                    --disable-avfilter
-                    --disable-avformat
-                    --disable-doc
-                    --disable-everything
-                    --disable-ffmpeg
-                    --disable-ffprobe
-                    --disable-network
-                    --disable-postproc
-                    --disable-swresample
-                    --enable-decoder=h264
-                    --enable-decoder=vp8
-                    --enable-decoder=vp9
-                    --cc="${CMAKE_C_COMPILER}"
-                    --cxx="${CMAKE_CXX_COMPILER}"
-                    ${FFmpeg_HWACCEL_FLAGS}
-            WORKING_DIRECTORY
-                ${FFmpeg_BUILD_DIR}
-        )
-        unset(FFmpeg_HWACCEL_FLAGS)
-
-        # Workaround for Ubuntu 18.04's older version of make not being able to call make as a child
-        # with context of the jobserver. Also helps ninja users.
-        execute_process(
-            COMMAND
-                nproc
-            OUTPUT_VARIABLE
-                SYSTEM_THREADS)
-
-        set(FFmpeg_BUILD_LIBRARIES ${FFmpeg_LIBRARIES})
-        add_custom_command(
-            OUTPUT
-                ${FFmpeg_BUILD_LIBRARIES}
-            COMMAND
-                make -j${SYSTEM_THREADS}
-            WORKING_DIRECTORY
-                ${FFmpeg_BUILD_DIR}
-        )
-
-        set(FFmpeg_INCLUDE_DIR
-            "${FFmpeg_PREFIX};${FFmpeg_BUILD_DIR};${FFmpeg_HWACCEL_INCLUDE_DIRS}"
-            CACHE PATH "Path to FFmpeg headers" FORCE)
-
-        set(FFmpeg_LDFLAGS
-            "${FFmpeg_HWACCEL_LDFLAGS}"
-            CACHE STRING "FFmpeg linker flags" FORCE)
-
-        # ALL makes this custom target build every time
-        # but it won't actually build if the DEPENDS parameter is up to date
-        add_custom_target(ffmpeg-configure ALL DEPENDS ${FFmpeg_MAKEFILE})
-        add_custom_target(ffmpeg-build ALL DEPENDS ${FFmpeg_BUILD_LIBRARIES} ffmpeg-configure)
-        link_libraries(${FFmpeg_LIBVA_LIBRARIES})
-        set(FFmpeg_LIBRARIES ${FFmpeg_BUILD_LIBRARIES} ${FFmpeg_HWACCEL_LIBRARIES}
-            CACHE PATH "Paths to FFmpeg libraries" FORCE)
-        unset(FFmpeg_BUILD_LIBRARIES)
-        unset(FFmpeg_HWACCEL_FLAGS)
-        unset(FFmpeg_HWACCEL_INCLUDE_DIRS)
-        unset(FFmpeg_HWACCEL_LDFLAGS)
-        unset(FFmpeg_HWACCEL_LIBRARIES)
-
-        if (FFmpeg_FOUND)
-            message(STATUS "Found FFmpeg version ${FFmpeg_VERSION}")
-        else()
-            message(FATAL_ERROR "FFmpeg not found")
-        endif()
-    else() # WIN32
-        # Use yuzu FFmpeg binaries
-        set(FFmpeg_EXT_NAME "ffmpeg-4.4")
-        set(FFmpeg_PATH "${CMAKE_BINARY_DIR}/externals/${FFmpeg_EXT_NAME}")
-        download_bundled_external("ffmpeg/" ${FFmpeg_EXT_NAME} "")
-        set(FFmpeg_FOUND YES)
-        set(FFmpeg_INCLUDE_DIR "${FFmpeg_PATH}/include" CACHE PATH "Path to FFmpeg headers" FORCE)
-        set(FFmpeg_LIBRARY_DIR "${FFmpeg_PATH}/bin" CACHE PATH "Path to FFmpeg library directory" FORCE)
-        set(FFmpeg_LDFLAGS "" CACHE STRING "FFmpeg linker flags" FORCE)
-        set(FFmpeg_DLL_DIR "${FFmpeg_PATH}/bin" CACHE PATH "Path to FFmpeg dll's" FORCE)
-        set(FFmpeg_LIBRARIES
-            ${FFmpeg_LIBRARY_DIR}/swscale.lib
-            ${FFmpeg_LIBRARY_DIR}/avcodec.lib
-            ${FFmpeg_LIBRARY_DIR}/avutil.lib
-            CACHE PATH "Paths to FFmpeg libraries" FORCE)
-    endif()
-endif()
-
-unset(FFmpeg_COMPONENTS)
 
 # Prefer the -pthread flag on Linux.
 set(THREADS_PREFER_PTHREAD_FLAG ON)
 find_package(Threads REQUIRED)
 
+# If unicorn isn't found, msvc -> download bundled unicorn; everyone else -> build external
+if (YUZU_USE_BUNDLED_UNICORN)
+    if (MSVC)
+        message(STATUS "unicorn not found, falling back to bundled")
+        # Detect toolchain and platform
+        if ((MSVC_VERSION GREATER_EQUAL 1910 AND MSVC_VERSION LESS 1930) AND ARCHITECTURE_x86_64)
+            set(UNICORN_VER "unicorn-yuzu")
+        else()
+            message(FATAL_ERROR "No bundled Unicorn binaries for your toolchain. Disable YUZU_USE_BUNDLED_UNICORN and provide your own.")
+        endif()
+
+        if (DEFINED UNICORN_VER)
+            download_bundled_external("unicorn/" ${UNICORN_VER} UNICORN_PREFIX)
+        endif()
+
+        if (DEFINED UNICORN_VER)
+            download_bundled_external("unicorn/" ${UNICORN_VER} UNICORN_PREFIX)
+        endif()
+
+        set(UNICORN_FOUND YES)
+        set(LIBUNICORN_INCLUDE_DIR "${UNICORN_PREFIX}/include" CACHE PATH "Path to Unicorn headers" FORCE)
+        set(LIBUNICORN_LIBRARY "${UNICORN_PREFIX}/lib/x64/unicorn_dynload.lib" CACHE PATH "Path to Unicorn library" FORCE)
+        set(UNICORN_DLL_DIR "${UNICORN_PREFIX}/lib/x64/" CACHE PATH "Path to unicorn.dll" FORCE)
+    else()
+        message(STATUS "unicorn not found, falling back to externals")
+        if (MINGW)
+            set(UNICORN_LIB_NAME "unicorn.a")
+        else()
+            set(UNICORN_LIB_NAME "libunicorn.a")
+        endif()
+
+        set(UNICORN_FOUND YES)
+        set(UNICORN_PREFIX ${PROJECT_SOURCE_DIR}/externals/unicorn)
+        set(LIBUNICORN_LIBRARY "${UNICORN_PREFIX}/${UNICORN_LIB_NAME}" CACHE PATH "Path to Unicorn library" FORCE)
+        set(LIBUNICORN_INCLUDE_DIR "${UNICORN_PREFIX}/include" CACHE PATH "Path to Unicorn headers" FORCE)
+        set(UNICORN_DLL_DIR "${UNICORN_PREFIX}/" CACHE PATH "Path to unicorn dynamic library" FORCE)
+
+        find_package(PythonInterp 2.7 REQUIRED)
+
+        if (MINGW)
+            # Intentionally call the unicorn makefile directly instead of using make.sh so that we can override the
+            # UNAME_S makefile variable to MINGW. This way we don't have to hack at the uname binary to build
+            # Additionally, overriding DO_WINDOWS_EXPORT prevents unicorn from patching the static unicorn.a by using msvc and cmd,
+            # which are both things we don't have in a mingw cross compiling environment.
+            add_custom_command(OUTPUT ${LIBUNICORN_LIBRARY}
+                COMMAND ${CMAKE_COMMAND} -E env UNICORN_ARCHS="aarch64" PYTHON="${PYTHON_EXECUTABLE}" CC=x86_64-w64-mingw32-gcc AR=x86_64-w64-mingw32-gcc-ar RANLIB=x86_64-w64-mingw32-gcc-ranlib make UNAME_S=MINGW DO_WINDOWS_EXPORT=0
+                WORKING_DIRECTORY ${UNICORN_PREFIX}
+            )
+        else()
+            add_custom_command(OUTPUT ${LIBUNICORN_LIBRARY}
+                COMMAND ${CMAKE_COMMAND} -E env UNICORN_ARCHS="aarch64" PYTHON="${PYTHON_EXECUTABLE}" /bin/sh make.sh macos-universal-no
+                WORKING_DIRECTORY ${UNICORN_PREFIX}
+            )
+        endif()
+
+        # ALL makes this custom target build every time
+        # but it won't actually build if LIBUNICORN_LIBRARY is up to date
+        add_custom_target(unicorn-build ALL
+            DEPENDS ${LIBUNICORN_LIBRARY}
+        )
+        unset(UNICORN_LIB_NAME)
+    endif()
+else()
+    find_package(Unicorn REQUIRED)
+endif()
+
+if (UNICORN_FOUND)
+    add_library(unicorn INTERFACE)
+    add_dependencies(unicorn unicorn-build)
+    target_link_libraries(unicorn INTERFACE "${LIBUNICORN_LIBRARY}")
+    target_include_directories(unicorn INTERFACE "${LIBUNICORN_INCLUDE_DIR}")
+else()
+    message(FATAL_ERROR "Could not find or build unicorn which is required.")
+endif()
+
 # Platform-specific library requirements
 # ======================================
 
@@ -760,7 +424,7 @@ if (APPLE)
 elseif (WIN32)
     # WSAPoll and SHGetKnownFolderPath (AppData/Roaming) didn't exist before WinNT 6.x (Vista)
     add_definitions(-D_WIN32_WINNT=0x0600 -DWINVER=0x0600)
-    set(PLATFORM_LIBRARIES winmm ws2_32 iphlpapi)
+    set(PLATFORM_LIBRARIES winmm ws2_32)
     if (MINGW)
         # PSAPI is the Process Status API
         set(PLATFORM_LIBRARIES ${PLATFORM_LIBRARIES} psapi imm32 version)
@@ -773,7 +437,7 @@ endif()
 # against all the src files. This should be used before making a pull request.
 # =======================================================================
 
-set(CLANG_FORMAT_POSTFIX "-12")
+set(CLANG_FORMAT_POSTFIX "-6.0")
 find_program(CLANG_FORMAT
     NAMES clang-format${CLANG_FORMAT_POSTFIX}
           clang-format

CMakeModules/CopyYuzuFFmpegDeps.cmake

@@ -1,6 +0,0 @@
-function(copy_yuzu_FFmpeg_deps target_dir)
-    include(WindowsCopyFiles)
-    set(DLL_DEST "${CMAKE_BINARY_DIR}/bin/$<CONFIG>/")
-    file(READ "${FFmpeg_PATH}/requirements.txt" FFmpeg_REQUIRED_DLLS)
-    windows_copy_files(${target_dir} ${FFmpeg_DLL_DIR} ${DLL_DEST} ${FFmpeg_REQUIRED_DLLS})
-endfunction(copy_yuzu_FFmpeg_deps)

CMakeModules/CopyYuzuQt5Deps.cmake

@@ -1,112 +1,53 @@
 function(copy_yuzu_Qt5_deps target_dir)
     include(WindowsCopyFiles)
-    if (MSVC)
-        set(DLL_DEST "${CMAKE_BINARY_DIR}/bin/$<CONFIG>/")
-        set(Qt5_DLL_DIR "${Qt5_DIR}/../../../bin")
-    else()
-        set(DLL_DEST "${CMAKE_BINARY_DIR}/bin/")
-        set(Qt5_DLL_DIR "${Qt5_DIR}/../../../lib/")
-    endif()
+    set(DLL_DEST "${CMAKE_BINARY_DIR}/bin/$<CONFIG>/")
+    set(Qt5_DLL_DIR "${Qt5_DIR}/../../../bin")
     set(Qt5_PLATFORMS_DIR "${Qt5_DIR}/../../../plugins/platforms/")
-    set(Qt5_PLATFORMTHEMES_DIR "${Qt5_DIR}/../../../plugins/platformthemes/")
-    set(Qt5_PLATFORMINPUTCONTEXTS_DIR "${Qt5_DIR}/../../../plugins/platforminputcontexts/")
-    set(Qt5_XCBGLINTEGRATIONS_DIR "${Qt5_DIR}/../../../plugins/xcbglintegrations/")
     set(Qt5_STYLES_DIR "${Qt5_DIR}/../../../plugins/styles/")
     set(Qt5_IMAGEFORMATS_DIR "${Qt5_DIR}/../../../plugins/imageformats/")
     set(Qt5_RESOURCES_DIR "${Qt5_DIR}/../../../resources/")
     set(PLATFORMS ${DLL_DEST}plugins/platforms/)
     set(STYLES ${DLL_DEST}plugins/styles/)
     set(IMAGEFORMATS ${DLL_DEST}plugins/imageformats/)
-    if (MSVC)
-        windows_copy_files(${target_dir} ${Qt5_DLL_DIR} ${DLL_DEST}
-            icudt*.dll
-            icuin*.dll
-            icuuc*.dll
-            Qt5Core$<$<CONFIG:Debug>:d>.*
-            Qt5Gui$<$<CONFIG:Debug>:d>.*
-            Qt5Widgets$<$<CONFIG:Debug>:d>.*
+    windows_copy_files(${target_dir} ${Qt5_DLL_DIR} ${DLL_DEST}
+        icudt*.dll
+        icuin*.dll
+        icuuc*.dll
+        Qt5Core$<$<CONFIG:Debug>:d>.*
+        Qt5Gui$<$<CONFIG:Debug>:d>.*
+        Qt5OpenGL$<$<CONFIG:Debug>:d>.*
+        Qt5Widgets$<$<CONFIG:Debug>:d>.*
+    )
+
+    if (YUZU_USE_QT_WEB_ENGINE)
+        windows_copy_files(${target_dir} ${Qt5_DLL_DIR} ${DLL_DEST} 
+            Qt5Network$<$<CONFIG:Debug>:d>.*
+            Qt5Positioning$<$<CONFIG:Debug>:d>.*
+            Qt5PrintSupport$<$<CONFIG:Debug>:d>.*
+            Qt5Qml$<$<CONFIG:Debug>:d>.*
+            Qt5Quick$<$<CONFIG:Debug>:d>.*
+            Qt5QuickWidgets$<$<CONFIG:Debug>:d>.*
+            Qt5WebChannel$<$<CONFIG:Debug>:d>.*
+            Qt5WebEngine$<$<CONFIG:Debug>:d>.*
+            Qt5WebEngineCore$<$<CONFIG:Debug>:d>.*
+            Qt5WebEngineWidgets$<$<CONFIG:Debug>:d>.*
+            QtWebEngineProcess$<$<CONFIG:Debug>:d>.*
         )
 
-        if (YUZU_USE_QT_WEB_ENGINE)
-            windows_copy_files(${target_dir} ${Qt5_DLL_DIR} ${DLL_DEST}
-                Qt5Network$<$<CONFIG:Debug>:d>.*
-                Qt5Positioning$<$<CONFIG:Debug>:d>.*
-                Qt5PrintSupport$<$<CONFIG:Debug>:d>.*
-                Qt5Qml$<$<CONFIG:Debug>:d>.*
-                Qt5QmlModels$<$<CONFIG:Debug>:d>.*
-                Qt5Quick$<$<CONFIG:Debug>:d>.*
-                Qt5QuickWidgets$<$<CONFIG:Debug>:d>.*
-                Qt5WebChannel$<$<CONFIG:Debug>:d>.*
-                Qt5WebEngine$<$<CONFIG:Debug>:d>.*
-                Qt5WebEngineCore$<$<CONFIG:Debug>:d>.*
-                Qt5WebEngineWidgets$<$<CONFIG:Debug>:d>.*
-                QtWebEngineProcess$<$<CONFIG:Debug>:d>.*
-            )
-
-            windows_copy_files(${target_dir} ${Qt5_RESOURCES_DIR} ${DLL_DEST}
-                qtwebengine_resources.pak
-                qtwebengine_devtools_resources.pak
-                qtwebengine_resources_100p.pak
-                qtwebengine_resources_200p.pak
-                icudtl.dat
-            )
-        endif ()
-        windows_copy_files(yuzu ${Qt5_PLATFORMS_DIR} ${PLATFORMS} qwindows$<$<CONFIG:Debug>:d>.*)
-        windows_copy_files(yuzu ${Qt5_STYLES_DIR} ${STYLES} qwindowsvistastyle$<$<CONFIG:Debug>:d>.*)
-        windows_copy_files(yuzu ${Qt5_IMAGEFORMATS_DIR} ${IMAGEFORMATS}
-            qjpeg$<$<CONFIG:Debug>:d>.*
-            qgif$<$<CONFIG:Debug>:d>.*
-            )
-    else()
-        set(Qt5_DLLS
-            "${Qt5_DLL_DIR}libQt5Core.so.5"
-            "${Qt5_DLL_DIR}libQt5DBus.so.5"
-            "${Qt5_DLL_DIR}libQt5Gui.so.5"
-            "${Qt5_DLL_DIR}libQt5Widgets.so.5"
-            "${Qt5_DLL_DIR}libQt5XcbQpa.so.5"
-            "${Qt5_DLL_DIR}libicudata.so.60"
-            "${Qt5_DLL_DIR}libicui18n.so.60"
-            "${Qt5_DLL_DIR}libicuuc.so.60"
-            )
-        set(Qt5_IMAGEFORMAT_DLLS
-            "${Qt5_IMAGEFORMATS_DIR}libqjpeg.so"
-            "${Qt5_IMAGEFORMATS_DIR}libqgif.so"
-            "${Qt5_IMAGEFORMATS_DIR}libqico.so"
-            )
-        set(Qt5_PLATFORMTHEME_DLLS
-            "${Qt5_PLATFORMTHEMES_DIR}libqgtk3.so"
-            "${Qt5_PLATFORMTHEMES_DIR}libqxdgdesktopportal.so"
-            )
-        set(Qt5_PLATFORM_DLLS
-            "${Qt5_PLATFORMS_DIR}libqxcb.so"
-            )
-        set(Qt5_PLATFORMINPUTCONTEXT_DLLS
-            "${Qt5_PLATFORMINPUTCONTEXTS_DIR}libcomposeplatforminputcontextplugin.so"
-            "${Qt5_PLATFORMINPUTCONTEXTS_DIR}libibusplatforminputcontextplugin.so"
-            )
-        set(Qt5_XCBGLINTEGRATION_DLLS
-            "${Qt5_XCBGLINTEGRATIONS_DIR}libqxcb-glx-integration.so"
-            )
-        foreach(LIB ${Qt5_DLLS})
-            file(COPY ${LIB} DESTINATION "${DLL_DEST}/lib" FOLLOW_SYMLINK_CHAIN)
-        endforeach()
-        foreach(LIB ${Qt5_IMAGEFORMAT_DLLS})
-            file(COPY ${LIB} DESTINATION "${DLL_DEST}plugins/imageformats/" FOLLOW_SYMLINK_CHAIN)
-        endforeach()
-        foreach(LIB ${Qt5_PLATFORMTHEME_DLLS})
-            file(COPY ${LIB} DESTINATION "${DLL_DEST}plugins/platformthemes/" FOLLOW_SYMLINK_CHAIN)
-        endforeach()
-        foreach(LIB ${Qt5_PLATFORM_DLLS})
-            file(COPY ${LIB} DESTINATION "${DLL_DEST}plugins/platforms/" FOLLOW_SYMLINK_CHAIN)
-        endforeach()
-        foreach(LIB ${Qt5_PLATFORMINPUTCONTEXT_DLLS})
-            file(COPY ${LIB} DESTINATION "${DLL_DEST}plugins/platforminputcontexts/" FOLLOW_SYMLINK_CHAIN)
-        endforeach()
-        foreach(LIB ${Qt5_XCBGLINTEGRATION_DLLS})
-            file(COPY ${LIB} DESTINATION "${DLL_DEST}plugins/xcbglintegrations/" FOLLOW_SYMLINK_CHAIN)
-        endforeach()
-
-    endif()
+        windows_copy_files(${target_dir} ${Qt5_RESOURCES_DIR} ${DLL_DEST}
+            qtwebengine_resources.pak
+            qtwebengine_devtools_resources.pak
+            qtwebengine_resources_100p.pak
+            qtwebengine_resources_200p.pak
+            icudtl.dat
+        )
+    endif ()
+    windows_copy_files(yuzu ${Qt5_PLATFORMS_DIR} ${PLATFORMS} qwindows$<$<CONFIG:Debug>:d>.*)
+    windows_copy_files(yuzu ${Qt5_STYLES_DIR} ${STYLES} qwindowsvistastyle$<$<CONFIG:Debug>:d>.*)
+    windows_copy_files(yuzu ${Qt5_IMAGEFORMATS_DIR} ${IMAGEFORMATS}
+        qjpeg$<$<CONFIG:Debug>:d>.*
+        qgif$<$<CONFIG:Debug>:d>.*
+        )
     # Create an empty qt.conf file. Qt will detect that this file exists, and use the folder that its in as the root folder.
     # This way it'll look for plugins in the root/plugins/ folder
     add_custom_command(TARGET yuzu POST_BUILD

CMakeModules/CopyYuzuUnicornDeps.cmake

@@ -0,0 +1,9 @@
+function(copy_yuzu_unicorn_deps target_dir)
+    include(WindowsCopyFiles)
+    set(DLL_DEST "${CMAKE_BINARY_DIR}/bin/$<CONFIG>/")
+    windows_copy_files(${target_dir} ${UNICORN_DLL_DIR} ${DLL_DEST}
+        libgcc_s_seh-1.dll
+        libwinpthread-1.dll
+        unicorn.dll
+    )
+endfunction(copy_yuzu_unicorn_deps)

CMakeModules/DownloadExternals.cmake

@@ -4,29 +4,15 @@
 #   remote_path: path to the file to download, relative to the remote repository root
 #   prefix_var: name of a variable which will be set with the path to the extracted contents
 function(download_bundled_external remote_path lib_name prefix_var)
-
-set(package_repo "no_platform")
-set(package_extension "no_platform")
-if (WIN32)
-    set(package_repo "ext-windows-bin/raw/master/")
-    set(package_extension ".7z")
-elseif (${CMAKE_SYSTEM_NAME} STREQUAL "Linux")
-    set(package_repo "ext-linux-bin/raw/main/")
-    set(package_extension ".tar.xz")
-else()
-    message(FATAL_ERROR "No package available for this platform")
-endif()
-set(package_url "https://github.com/yuzu-emu/${package_repo}")
-
 set(prefix "${CMAKE_BINARY_DIR}/externals/${lib_name}")
 if (NOT EXISTS "${prefix}")
     message(STATUS "Downloading binaries for ${lib_name}...")
     file(DOWNLOAD
-        ${package_url}${remote_path}${lib_name}${package_extension}
-        "${CMAKE_BINARY_DIR}/externals/${lib_name}${package_extension}" SHOW_PROGRESS)
-    execute_process(COMMAND ${CMAKE_COMMAND} -E tar xf "${CMAKE_BINARY_DIR}/externals/${lib_name}${package_extension}"
+        https://github.com/yuzu-emu/ext-windows-bin/raw/master/${remote_path}${lib_name}.7z
+        "${CMAKE_BINARY_DIR}/externals/${lib_name}.7z" SHOW_PROGRESS)
+    execute_process(COMMAND ${CMAKE_COMMAND} -E tar xf "${CMAKE_BINARY_DIR}/externals/${lib_name}.7z"
         WORKING_DIRECTORY "${CMAKE_BINARY_DIR}/externals")
 endif()
 message(STATUS "Using bundled binaries at ${prefix}")
 set(${prefix_var} "${prefix}" PARENT_SCOPE)
-endfunction()
+endfunction()

CMakeModules/GenerateSCMRev.cmake

@@ -48,6 +48,69 @@ if (BUILD_REPOSITORY)
   endif()
 endif()
 
-# The variable SRC_DIR must be passed into the script
-# (since it uses the current build directory for all values of CMAKE_*_DIR)
+# The variable SRC_DIR must be passed into the script (since it uses the current build directory for all values of CMAKE_*_DIR)
+set(VIDEO_CORE "${SRC_DIR}/src/video_core")
+set(HASH_FILES
+    "${VIDEO_CORE}/renderer_opengl/gl_arb_decompiler.cpp"
+    "${VIDEO_CORE}/renderer_opengl/gl_arb_decompiler.h"
+    "${VIDEO_CORE}/renderer_opengl/gl_shader_cache.cpp"
+    "${VIDEO_CORE}/renderer_opengl/gl_shader_cache.h"
+    "${VIDEO_CORE}/renderer_opengl/gl_shader_decompiler.cpp"
+    "${VIDEO_CORE}/renderer_opengl/gl_shader_decompiler.h"
+    "${VIDEO_CORE}/renderer_opengl/gl_shader_disk_cache.cpp"
+    "${VIDEO_CORE}/renderer_opengl/gl_shader_disk_cache.h"
+    "${VIDEO_CORE}/shader/decode/arithmetic.cpp"
+    "${VIDEO_CORE}/shader/decode/arithmetic_half.cpp"
+    "${VIDEO_CORE}/shader/decode/arithmetic_half_immediate.cpp"
+    "${VIDEO_CORE}/shader/decode/arithmetic_immediate.cpp"
+    "${VIDEO_CORE}/shader/decode/arithmetic_integer.cpp"
+    "${VIDEO_CORE}/shader/decode/arithmetic_integer_immediate.cpp"
+    "${VIDEO_CORE}/shader/decode/bfe.cpp"
+    "${VIDEO_CORE}/shader/decode/bfi.cpp"
+    "${VIDEO_CORE}/shader/decode/conversion.cpp"
+    "${VIDEO_CORE}/shader/decode/ffma.cpp"
+    "${VIDEO_CORE}/shader/decode/float_set.cpp"
+    "${VIDEO_CORE}/shader/decode/float_set_predicate.cpp"
+    "${VIDEO_CORE}/shader/decode/half_set.cpp"
+    "${VIDEO_CORE}/shader/decode/half_set_predicate.cpp"
+    "${VIDEO_CORE}/shader/decode/hfma2.cpp"
+    "${VIDEO_CORE}/shader/decode/image.cpp"
+    "${VIDEO_CORE}/shader/decode/integer_set.cpp"
+    "${VIDEO_CORE}/shader/decode/integer_set_predicate.cpp"
+    "${VIDEO_CORE}/shader/decode/memory.cpp"
+    "${VIDEO_CORE}/shader/decode/texture.cpp"
+    "${VIDEO_CORE}/shader/decode/other.cpp"
+    "${VIDEO_CORE}/shader/decode/predicate_set_predicate.cpp"
+    "${VIDEO_CORE}/shader/decode/predicate_set_register.cpp"
+    "${VIDEO_CORE}/shader/decode/register_set_predicate.cpp"
+    "${VIDEO_CORE}/shader/decode/shift.cpp"
+    "${VIDEO_CORE}/shader/decode/video.cpp"
+    "${VIDEO_CORE}/shader/decode/warp.cpp"
+    "${VIDEO_CORE}/shader/decode/xmad.cpp"
+    "${VIDEO_CORE}/shader/ast.cpp"
+    "${VIDEO_CORE}/shader/ast.h"
+    "${VIDEO_CORE}/shader/compiler_settings.cpp"
+    "${VIDEO_CORE}/shader/compiler_settings.h"
+    "${VIDEO_CORE}/shader/control_flow.cpp"
+    "${VIDEO_CORE}/shader/control_flow.h"
+    "${VIDEO_CORE}/shader/decode.cpp"
+    "${VIDEO_CORE}/shader/expr.cpp"
+    "${VIDEO_CORE}/shader/expr.h"
+    "${VIDEO_CORE}/shader/node.h"
+    "${VIDEO_CORE}/shader/node_helper.cpp"
+    "${VIDEO_CORE}/shader/node_helper.h"
+    "${VIDEO_CORE}/shader/registry.cpp"
+    "${VIDEO_CORE}/shader/registry.h"
+    "${VIDEO_CORE}/shader/shader_ir.cpp"
+    "${VIDEO_CORE}/shader/shader_ir.h"
+    "${VIDEO_CORE}/shader/track.cpp"
+    "${VIDEO_CORE}/shader/transform_feedback.cpp"
+    "${VIDEO_CORE}/shader/transform_feedback.h"
+)
+set(COMBINED "")
+foreach (F IN LISTS HASH_FILES)
+    file(READ ${F} TMP)
+    set(COMBINED "${COMBINED}${TMP}")
+endforeach()
+string(MD5 SHADER_CACHE_VERSION "${COMBINED}")
 configure_file("${SRC_DIR}/src/common/scm_rev.cpp.in" "scm_rev.cpp" @ONLY)

README.md

@@ -1,82 +1,42 @@
-<h1 align="center">
-  <br>
-  <a href="https://yuzu-emu.org/"><img src="https://raw.githubusercontent.com/yuzu-emu/yuzu-assets/master/icons/icon.png" alt="yuzu" width="200"></a>
-  <br>
-  <b>yuzu</b>
-  <br>
-</h1>
+yuzu emulator
+=============
+[![Travis CI Build Status](https://travis-ci.com/yuzu-emu/yuzu.svg?branch=master)](https://travis-ci.com/yuzu-emu/yuzu)
+[![Azure Mainline CI Build Status](https://dev.azure.com/yuzu-emu/yuzu/_apis/build/status/yuzu%20mainline?branchName=master)](https://dev.azure.com/yuzu-emu/yuzu/)
+[![Discord](https://img.shields.io/discord/398318088170242053?color=%237289DA&label=yuzu&logo=discord&logoColor=white)](https://discord.gg/XQV6dn9)
 
-<h4 align="center"><b>yuzu</b> is the world's most popular, open-source, Nintendo Switch emulator — started by the creators of <a href="https://citra-emu.org" target="_blank">Citra</a>.
-<br>
-It is written in C++ with portability in mind, and we actively maintain builds for Windows and Linux.
-</h4>
+yuzu is an experimental open-source emulator for the Nintendo Switch from the creators of [Citra](https://citra-emu.org/).
 
-<p align="center">
-    <a href="https://dev.azure.com/yuzu-emu/yuzu/">
-        <img src="https://dev.azure.com/yuzu-emu/yuzu/_apis/build/status/yuzu%20mainline?branchName=master"
-            alt="Azure Mainline CI Build Status">
-    </a>
-    <a href="https://discord.com/invite/u77vRWY">
-        <img src="https://img.shields.io/discord/398318088170242053?color=%237289DA&label=yuzu&logo=discord&logoColor=white"
-            alt="Discord">
-    </a>
-</p>
+It is written in C++ with portability in mind, with builds actively maintained for Windows and Linux. The emulator is capable of running several commercial games.
 
-<p align="center">
-  <a href="#compatibility">Compatibility</a> |
-  <a href="#development">Development</a> |
-  <a href="#building">Building</a> |
-  <a href="#download">Download</a> |
-  <a href="#support">Support</a> |
-  <a href="#license">License</a>
-</p>
+yuzu only emulates a subset of Switch hardware and therefore most commercial games **do not** run at full speed or are not fully functional.
 
-## Compatibility
+Do you want to check which games are compatible and which ones are not? Please visit our [Compatibility page](https://yuzu-emu.org/game/)!
 
-The emulator is capable of running most commercial games at full speed, provided you meet the [necessary hardware requirements](https://yuzu-emu.org/help/quickstart/#hardware-requirements).
+yuzu is licensed under the GPLv2 (or any later version). Refer to the license.txt file included.
 
-For a full list of games yuzu support, please visit our [Compatibility page](https://yuzu-emu.org/game/)
+Check out our [website](https://yuzu-emu.org/)!
 
-Check out our [website](https://yuzu-emu.org/) for the latest news on exciting features, monthly progress reports, and more!
+For development discussion, please join us on [Discord](https://discord.gg/XQV6dn9).
 
-## Development
+### Development
 
-Most of the development happens on GitHub. It's also where [our central repository](https://github.com/yuzu-emu/yuzu) is hosted. For development discussion, please join us on [Discord](https://discord.com/invite/u77vRWY).
+Most of the development happens on GitHub. It's also where [our central repository](https://github.com/yuzu-emu/yuzu) is hosted.
 
-If you want to contribute, please take a look at the [Contributor's Guide](https://github.com/yuzu-emu/yuzu/wiki/Contributing) and [Developer Information](https://github.com/yuzu-emu/yuzu/wiki/Developer-Information).
-You can also contact any of the developers on Discord in order to know about the current state of the emulator.
+If you want to contribute please take a look at the [Contributor's Guide](https://github.com/yuzu-emu/yuzu/wiki/Contributing) and [Developer Information](https://github.com/yuzu-emu/yuzu/wiki/Developer-Information). You should also contact any of the developers on Discord in order to know about the current state of the emulator.
 
-If you want to contribute to the user interface translation project, please check out the [yuzu project on transifex](https://www.transifex.com/yuzu-emulator/yuzu). We centralize translation work there, and periodically upstream translations.
-
-## Building
+### Building
 
 * __Windows__: [Windows Build](https://github.com/yuzu-emu/yuzu/wiki/Building-For-Windows)
 * __Linux__: [Linux Build](https://github.com/yuzu-emu/yuzu/wiki/Building-For-Linux)
-
-## Download
-
-You can download the latest releases automatically via the installer on our [downloads](https://yuzu-emu.org/downloads/) page.
+* __macOS__: [macOS Build](https://github.com/yuzu-emu/yuzu/wiki/Building-for-macOS)
 
 
-## Support
-
-If you enjoy the project and want to support us financially, check out our Patreon!
-
-<a href="https://www.patreon.com/yuzuteam">
-    <img src="https://c5.patreon.com/external/logo/become_a_patron_button@2x.png" width="160">
-</a>
-
-Any donations received will go towards things like:
+### Support
+We happily accept monetary donations or donated games and hardware. Please see our [donations page](https://yuzu-emu.org/donate/) for more information on how you can contribute to yuzu. Any donations received will go towards things like:
 * Switch consoles to explore and reverse-engineer the hardware
 * Switch games for testing, reverse-engineering, and implementing new features
 * Web hosting and infrastructure setup
 * Software licenses (e.g. Visual Studio, IDA Pro, etc.)
 * Additional hardware (e.g. GPUs as-needed to improve rendering support, other peripherals to add support for, etc.)
 
-If you wish to support us a different way, please join our [Discord](https://discord.gg/u77vRWY) and talk to bunnei. You may also contact: donations@yuzu-emu.org.
-
-## License
-
-yuzu is licensed under the GPLv2 (or any later version). Refer to the [license.txt](https://github.com/yuzu-emu/yuzu/blob/master/license.txt) file.
-
-The [Skyline-Emulator Team](https://github.com/skyline-emu/skyline) is exempt from GPLv2 for the contributions from all these contributors [FernandoS27](https://github.com/FernandoS27), [lioncash](https://github.com/lioncash), [bunnei](https://github.com/bunnei), [ReinUsesLisp](https://github.com/ReinUsesLisp), [Morph1984](https://github.com/Morph1984), [ogniK5377](https://github.com/ogniK5377), [german77](https://github.com/german77), [ameerj](https://github.com/ameerj), [Kelebek1](https://github.com/Kelebek1) and [lat9nq](https://github.com/lat9nq). They may only use the code from these contributors under Mozilla Public License, version 2.0.
+We also more than gladly accept used Switch consoles, preferably ones with firmware 3.0.0 or lower! If you would like to give yours away, don't hesitate to join our [Discord](https://discord.gg/VXqngT3) and talk to bunnei. You may also contact: donations@yuzu-emu.org.

dist/icons/controller/controller.qrc

@@ -1,34 +0,0 @@
-<RCC>
-  <qresource prefix="controller">
-    <file alias="applet_dual_joycon">applet_dual_joycon.png</file>
-    <file alias="applet_dual_joycon_dark">applet_dual_joycon_dark.png</file>	
-    <file alias="applet_dual_joycon_midnight">applet_dual_joycon_midnight.png</file>	
-    <file alias="applet_handheld">applet_handheld.png</file>
-    <file alias="applet_handheld_dark">applet_handheld_dark.png</file>	
-    <file alias="applet_handheld_midnight">applet_handheld_midnight.png</file>
-    <file alias="applet_pro_controller">applet_pro_controller.png</file>
-    <file alias="applet_pro_controller_dark">applet_pro_controller_dark.png</file>
-    <file alias="applet_pro_controller_midnight">applet_pro_controller_midnight.png</file>
-    <file alias="applet_joycon_left">applet_single_joycon_left.png</file>
-    <file alias="applet_joycon_left_dark">applet_single_joycon_left_dark.png</file>
-    <file alias="applet_joycon_left_midnight">applet_single_joycon_left_midnight.png</file>
-    <file alias="applet_joycon_right">applet_single_joycon_right.png</file>
-    <file alias="applet_joycon_right_dark">applet_single_joycon_right_dark.png</file>
-    <file alias="applet_joycon_right_midnight">applet_single_joycon_right_midnight.png</file>
-    <file alias="applet_dual_joycon_disabled">applet_dual_joycon_disabled.png</file>
-    <file alias="applet_dual_joycon_dark_disabled">applet_dual_joycon_dark_disabled.png</file>
-    <file alias="applet_dual_joycon_midnight_disabled">applet_dual_joycon_midnight_disabled.png</file>
-    <file alias="applet_handheld_disabled">applet_handheld_disabled.png</file>
-    <file alias="applet_handheld_dark_disabled">applet_handheld_dark_disabled.png</file>
-    <file alias="applet_handheld_midnight_disabled">applet_handheld_midnight_disabled.png</file>
-    <file alias="applet_pro_controller_disabled">applet_pro_controller_disabled.png</file>
-    <file alias="applet_pro_controller_dark_disabled">applet_pro_controller_dark_disabled.png</file>
-    <file alias="applet_pro_controller_midnight_disabled">applet_pro_controller_midnight_disabled.png</file>
-    <file alias="applet_joycon_left_disabled">applet_single_joycon_left_disabled.png</file>
-    <file alias="applet_joycon_left_dark_disabled">applet_single_joycon_left_dark_disabled.png</file>
-    <file alias="applet_joycon_left_midnight_disabled">applet_single_joycon_left_midnight_disabled.png</file>
-    <file alias="applet_joycon_right_disabled">applet_single_joycon_right_disabled.png</file>
-    <file alias="applet_joycon_right_dark_disabled">applet_single_joycon_right_dark_disabled.png</file>
-    <file alias="applet_joycon_right_midnight_disabled">applet_single_joycon_right_midnight_disabled.png</file>
-  </qresource>
-</RCC>